Page 1 of 1
Terrano Injection pump
Posted: Sun Mar 12, 2006 8:02 pm
by Selwyn
Hi,
Ive just changed the top and side cover seals to my injection pump and stuck it back together and now it will not start. I have primed and bleed it with no luck, I have diesel to the pump but is not pumping thru to the injectors.
Can anyone help
Regards
;-p
Posted: Sun Mar 12, 2006 8:08 pm
by wopass
seal slipped maybe ? bleed each line individually ? maybe ?
Posted: Mon Mar 13, 2006 5:30 am
by krawlr
when youre bleeding are you pumping the plunger till its firm?
might be like those new rodeos,might have to do the old comp air trick
let us know ?????
Posted: Mon Mar 13, 2006 7:10 am
by Selwyn
Thanks for info.
Pump is tighting, loosening screw at inlet ,diesel pumping into pump, removing return hose, diesel coming out the other end of pump.
But when connecting all back up then turning it over and lossening injector nut to motor no diesel coming thru.
Regards
Posted: Mon Mar 13, 2006 12:08 pm
by krawlr
ok get youre self a dust or blow gun wrap a rag around it and jam it into youre filler hole so its nice and sealed and get someone to crank it while you do this.......(obviously youre trying to pressurise youre fuel tank!)
i hope this is clear as mud ,get to it............
let me know how ya get on one thing ay a time bud
Posted: Mon Mar 13, 2006 8:30 pm
by dctecho
maybe a silly question but did you reconect the wire to the electric stop solenoid on the pump??? just a thought.
Posted: Mon Mar 13, 2006 9:26 pm
by wopass
dctecho wrote:maybe a silly question but did you reconect the wire to the electric stop solenoid on the pump??? just a thought.
ive done that once...very embarresing
... but so funny for everyone else
Posted: Tue Mar 14, 2006 6:45 pm
by Selwyn
Firing on all injectors.
Was the governing screw at the back of the pump, hadn't wound it in far enough and was resticting the diesel flow to the injectors.
Thanks all for your help
