Page 1 of 1
Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 9:08 am
by red-devil
first time up the ramp
RTI = 700mm / 2850 * 1000
RTI = 245.61
Front Radius Bolt Removed
Front Radius Bolt Removed
Front Radius Bolt Removed
Front Radius Bolt Removed
RTI = 790mm / 2850 * 1000
RTI = 277.19
if a get another chance il leave the raduis bolt in and remove my disconnects for the sway bar
Cheers pete and rick
jono
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 3:47 pm
by skid
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 5:13 pm
by nstacey
New tyres Skid?
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 5:29 pm
by skid
nstacey wrote:New tyres Skid?
flatmates bush tyres
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 6:11 pm
by red-devil
skid did you measure the vertical height so you can work out ur rti
Jono
how did u feel up there, my cruiser was very stable to my amazment
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 6:19 pm
by skid
red-devil wrote:skid did you measure the vertical height so you can work out ur rti
Jono
how did u feel up there, my cruiser was very stable to my amazment
nup, just drove it up, got out, took some pics and backed it off again
all swaybars radius arms etc etc connected
just threw a piccie up as a comparison
34" jungle trekkers
Re: Landcruiser 80 series RTI
Posted: Wed Dec 23, 2009 6:24 pm
by red-devil
cruiser has 35" wranglers 4" suppension lift an a " body.
look like my rear wheel is a little more stuffed in the guard
