Page 1 of 2
13 - 14 March 2010
Posted: Fri Mar 12, 2010 6:14 pm
by wopass
Re: 13 - 14 March 2010
Posted: Fri Mar 12, 2010 6:17 pm
by skid
wopass wrote:well fark yas ill start another one
got all crazy after work tonight
thorough dissappointment
thought I was gonna see some of the stuff I normally get from Rexo, when ya said ya went all crazy.
I must of missed the invite in my letterbox, I'm picking this afternoons storm must of blown it away
so just a quick port n polish and slot her back in then
Re: 13 - 14 March 2010
Posted: Fri Mar 12, 2010 6:35 pm
by Andrew1706
Re: 13 - 14 March 2010
Posted: Fri Mar 12, 2010 7:04 pm
by wopass
skid wrote:wopass wrote:well fark yas ill start another one
got all crazy after work tonight
thorough dissappointment
thought I was gonna see some of the stuff I normally get from Rexo, when ya said ya went all crazy.
I must of missed the invite in my letterbox, I'm picking this afternoons storm must of blown it away
so just a quick port n polish and slot her back in then
will let you know when you need to come give me a hand bro...and bring your tissues
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 5:35 pm
by xj
Broke shit........................
front left upper and lower control arms got bent outa shape, which put the driveshaft back into my now "multifaceted" transfer case.
Ah well, whaddya do...........
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 6:35 pm
by wopass
xj wrote:Broke shit........................
front left upper and lower control arms got bent outa shape, which put the driveshaft back into my now "multifaceted" transfer case.
Ah well, whaddya do...........
erm.... not gonna answer that cos you allready know
where you go hooning? tommos again?
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 6:41 pm
by xj
wopass wrote:xj wrote:Broke shit........................
front left upper and lower control arms got bent outa shape, which put the driveshaft back into my now "multifaceted" transfer case.
Ah well, whaddya do...........
erm.... not gonna answer that cos you allready know
where you go hooning? tommos again?
boys day out at mystery creek
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 6:46 pm
by wopass
xj wrote:boys day out at mystery creek
ohh is that this weekend?? bugger. you were driving your rig out there??
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 7:20 pm
by xj
wopass wrote:xj wrote:boys day out at mystery creek
ohh is that this weekend?? bugger. you were driving your rig out there??
erm no Ben it broke while sitting in the shed.
Finishes tomorrow arvo, pretty cool. lots of cars and car stuff, motor x, skating demos etc, shooting shit, fishing gear and lasses with long legs and short skirts.
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 7:31 pm
by wopass
xj wrote:wopass wrote:xj wrote:boys day out at mystery creek
ohh is that this weekend?? bugger. you were driving your rig out there??
erm no Ben
it broke while sitting in the shed.Finishes tomorrow arvo, pretty cool. lots of cars and car stuff, motor x, skating demos etc, shooting shit, fishing gear and lasses with long legs and short skirts.
that wouldnt surprise me
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 7:48 pm
by Dr_PC
Sitting in the motel in Hastings having a rum waiting for tomorrows rally
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 8:08 pm
by Noeyedeer
xj wrote:Broke shit........................
front left upper and lower control arms got bent outa shape, which put the driveshaft back into my now "multifaceted" transfer case.
Ah well, whaddya do...........
Yeah just happened to be there and saw that happen
tough luck dude, usually its the rovers that break stuff
said with tongue in cheek not the other way round.Looked like you were enjoying stropping around anyhow, I would have been
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 8:40 pm
by juz
Up at 6 this morning to pickup S.A.R fullas, was good trip into back of Silver Peaks, Safari R/F CV started clicking so new one on the cards me thinks, Was planning on welding up some opening up floor seems and bracing up round front body mounts anyway. Oh and found out why odometer wasnt working!(switch under the dash,bastards!)
Re: 13 - 14 March 2010
Posted: Sat Mar 13, 2010 9:28 pm
by Toymota2
Went down to Ngaruawahia this morning to pick up my new mud hack 92 SWB V6 manual Pajero. Keen to get out there
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 9:51 am
by xj
Noeyedeer wrote:xj wrote:Broke shit........................
front left upper and lower control arms got bent outa shape, which put the driveshaft back into my now "multifaceted" transfer case.
Ah well, whaddya do...........
Yeah just happened to be there and saw that happen
tough luck dude, usually its the rovers that break stuff
said with tongue in cheek not the other way round.Looked like you were enjoying stropping around anyhow, I would have been
Yeah it was a ball. Hopefully those that we were giving rides too enjoyed themselves as well.
Cool day/weekend, with a bit of luck we will see it back next year.
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 10:00 am
by haydgq
juz wrote:Up at 6 this morning to pickup S.A.R fullas, was good trip into back of Silver Peaks, Safari R/F CV started clicking so new one on the cards me thinks, Was planning on welding up some opening up floor seems and bracing up round front body mounts anyway. Oh and found out why speedo wasnt working!
(switch under the dash,bastards!)
They must of istalled it wrong as the switch should be wired so that only the Odo stops ticking over and it never affects the rev counter or speedo eh.
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 10:07 am
by vvega
cut off rear half of chassis ... rebuilt with tube .. fitted coilovers to rear
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 10:11 am
by turoa
vvega wrote:cut off rear half of chassis ... rebuilt with tube .. fitted coilovers to rear
YOU FAWKER...... stop copying me
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 10:24 am
by haydgq
vvega wrote:cut off rear half of chassis ... rebuilt with tube .. fitted coilovers to rear
Where's the pics at Wayne.?
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 11:25 am
by juz
haydgq wrote:juz wrote:Up at 6 this morning to pickup S.A.R fullas, was good trip into back of Silver Peaks, Safari R/F CV started clicking so new one on the cards me thinks, Was planning on welding up some opening up floor seems and bracing up round front body mounts anyway. Oh and found out why speedo wasnt working!
(switch under the dash,bastards!)
They must of istalled it wrong as the switch should be wired so that only the Odo stops ticking over and it never affects the rev counter or speedo eh.
Nah im just an idiot and wrote speedo instead of odometer 
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 12:38 pm
by chevrolux
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 2:26 pm
by 92 safari 17
Pulled The Stickers off my Safari, took 6 hrs, a heat gun and a tin of cut and polish. stared to do a body lift, then found there are U shaped brakets welded to the body on the two back mounts
how do you get rid of them?
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 3:08 pm
by vvega
turoa wrote:vvega wrote:cut off rear half of chassis ... rebuilt with tube .. fitted coilovers to rear
YOU FAWKER...... stop copying me
hahahahaha
just waiting on coilovers from 4wd bits now ... will have that sorted tomorrow
plan for the next week in to midmount the engine
and no .. no pics
cant go giving it all away just yet
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 4:04 pm
by mike
Finally mounted my trans coil where it was supposed to go 2 years ago!!, pull the winch apart, drilled out the rivets and removed the brush holder, removed the rust on the spacer plate allowing the electrons to flow again, put back together again but added some pressure giving washers on the inside of the motor cover to increase the pressure on the brush plate to the motor put the wires back on and runva it fired back into life. painted the winch craddle black, next is the bars hopefully this week. Also watched district 9, glorious basterds and terminator salvation
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 4:23 pm
by Jerry
was up at Rallywoods yesterday....Suzuki1K at Play...
Margarine Taz
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 4:39 pm
by Swamped
92 safari 17 wrote:Pulled The Stickers off my Safari, took 6 hrs, a heat gun and a tin of cut and polish. stared to do a body lift, then found there are U shaped brakets welded to the body on the two back mounts
how do you get rid of them?
Cut em off and have the new bolts the other way round
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 5:02 pm
by MNC
vvega wrote:just waiting on coilovers from 4wd bits now ... will have that sorted tomorrow
plan for the next week in to midmount the engine
and no .. no pics
cant go giving it all away just yet
You Big Tease!
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 5:11 pm
by J_Dub
finished painting ute/cab piece. looks good. think ill get a canvas window made up instead so it can be rolled up, visibility is awesome with nothing at all behind the seats.
locka should turn up next week
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 8:12 pm
by Bolo
Well Saturday, went up to Paraparaumu to get a Evo 4 , and towed it down to work, so it is in the shop now and now to change the rear diff ( mondays job
) ..... and today , went into rallywoods ( passed Jafa on the way in ) but i went up to help Bundy his clutch in his cruiser , so at the same time we pulled the 5 speed out and put a 4 speed in , and now have most of it back togeather , just got to add a spacer to the rear driveshaft and bolt it in , and adjust the clutch , and then it is play time
Re: 13 - 14 March 2010
Posted: Sun Mar 14, 2010 10:12 pm
by juz
92 safari 17 wrote:Pulled The Stickers off my Safari, took 6 hrs, a heat gun and a tin of cut and polish.
You can get things called caramel wheels/signwriting removers that go on a drill, rips the stickers off without touching the paint, then use prepsol,wax & grease remover,petrol to take off the sticky shit.
