Page 1 of 1
80 series
Posted: Mon Mar 22, 2010 8:42 pm
by firestonecruiser
hey there just wondering what people would pay for a 93 cruiser. it has a 50mm spring lift and longer raw shocks all 6 mths old, 50 mm body lift tjm front bar plus new 315/75R16 maxxis bighorns and 16x8 white spokes. it has done 240000ks and been regularly serviced every 5000k with delo 400 oil. new diff oil and auto trans serviced less than 10000k ago.runs like a dream
cheers jono
Re: 80 series
Posted: Wed Mar 24, 2010 10:57 am
by Jungle
And now the questions start.
Is that the 12 valve diesel? Does it have the diff locks? Is the bar steel or aluminum. Does it have the winch?
Has the steering box broken the chassis yet?
I'd put it at anything from 10 to 15K. A dealer would probably want 20K every day. They seem to be holding there value again now that the imports have stopped.
Cheers
Jungle
Re: 80 series
Posted: Wed Mar 24, 2010 6:05 pm
by PigFmr
Jono you have seen the light then,you guna get a nissan
Re: 80 series
Posted: Wed Mar 24, 2010 7:39 pm
by firestonecruiser
it is the 12 valve, tjm bar is alluminium and no has no winch. the steering box has not broken the chassis. this is immaculate with no dents what so ever. vince i have seen the light and may go to short wheel base cruiser but never a nissan lmao.
cheers jono
Re: 80 series
Posted: Thu Mar 25, 2010 7:51 am
by Jungle
It does sound like a nice truck.
Have a careful look around the back of the steering box. It's the spot welds on the anti crush sleeves that initiate the cracks in the chassis. I spotted one on a cruiser with standard tyre's and suspension the other day. Thought it may have only effected the tall big tyred trucks. Go figure.
Jungle
Re: 80 series
Posted: Thu Mar 25, 2010 10:53 am
by Sadam_Husain