Page 1 of 1

What brand leaf springs to get.

Posted: Fri Apr 30, 2010 1:12 am
by Muddboots
In my landcruiser 74, the front leaf springs are badly sagged – only 30mm of travel on one side. So I am going to replace them with a 50MM lift.

Somebody once said to go for EFS springs as they don’t sag like some others can, but I’ve also had a quote for some Maxi Tracks which were about $150 cheaper.

So, would just like to know how anyone else has found either brand. Does it pay spend the extra for the EFS springs? Or is there another brand I should look at?

Re: What brand leaf springs to get.

Posted: Fri Apr 30, 2010 8:07 am
by ClassicCruiserSpares
Dont waste your your time with maxi tracks there crap and some of there springs have different sets between sides so one side will sit higher than the other, i would look through these threads because ''big'' is selling a complete 2" lift kit for a 70 series which is Old man emu springs shocks and shackles and hes wants alot less than you could buy new.

Re: What brand leaf springs to get.

Posted: Fri Apr 30, 2010 8:20 am
by ski
Hiya,I have a mwb cruiser with pto and bullbar,I went for the heavyest set of efs springs in the front about a year ago and found them a little stiff but that is because the weight up front,they are now settling down and are taking a pounding,awesome,This brand was recommend buy some winch truck guys who have been using this brand for years.Like your self I had no idea of springs,so I asked around.Would go efs again.Cheers.

Re: What brand leaf springs to get.

Posted: Fri Apr 30, 2010 11:37 am
by Sadam_Husain
I put a set of OME malaysian made dakka springs in my truck about 6 years ago and they are still sitting high. They are the heavy duty ones which are stiffer but its a big heavy truck and as ski says theres a lot of extra weight if you've got a winch bar and winch hanging off the front. My truck has a harsh hard ride but your never going to get a good ride on leaves but its got enough weight to flex as good as leaves can when it has to. I think I paid $220 plus gst a side from g guy's? Its also worth doing greasable shackles and pins to keep everything lubed up and moving nicely while your at it :mrgreen:


Image



theres no engine or bar on my truck at the moment but it still hasnt sagged out ofter 6+ years

Image

Re: What brand leaf springs to get.

Posted: Fri Apr 30, 2010 11:40 am
by Henry
Hi

Put anti-inversion shackles on as well. Saves a bent spring a week after installing.
I have put ARB on and not sagged in 5 years..