Ball Joint Flip
Posted: Fri May 05, 2006 5:23 pm
Does any one have/ Can make the spacer that is need for the ball joint flip.
Cheers Jono
Cheers Jono
Offroad-Express
The opinions and viewpoints expressed by users of Offroad-Express Forums are wholly their own and not necessarily those of Offroad-Express.
https://www.offroadexpress.kiwi:443/Forums/
Ball Joint Flip
https://www.offroadexpress.kiwi:443/Forums/viewtopic.php?t=2167
Page 1 of 1
Posted: Fri May 05, 2006 8:39 pm
you dont NEED the spacer, you know that aye?
Posted: Fri May 05, 2006 8:46 pm
Posted: Sat May 06, 2006 11:02 am
opps sorry no i didnt 
Ilike the idea of 10mm blots so thanks
jono
Ilike the idea of 10mm blots so thanks
jono
Posted: Sat May 06, 2006 6:26 pm
Cheers for the info, Flip all done in 2 hours this avo 
Jono
Jono
Posted: Sat May 06, 2006 6:29 pm
easy as aye? you do the 10mm bolts at the same time?
Posted: Sat May 06, 2006 6:36 pm
Yes after looking at it and thinking need bigger bolts.
im thinking about finding some spacers ( 10- 15 mm ) to gain a little more space for the upper bump stops.
or just trim the bump stops down a little
Jono
im thinking about finding some spacers ( 10- 15 mm ) to gain a little more space for the upper bump stops.
or just trim the bump stops down a little
Jono
Posted: Sat May 06, 2006 6:40 pm
i just trimmed mine. everyone else seemed to do it so figured it cant be all that bad... what sort of paj have you got?
Posted: Sat May 06, 2006 6:55 pm
91 soft top 2.5d turbo.
mods so far
93 long wheel base rear spring in rear for the gain of 50mm height
lose the front and read bars for a nice 6mm steel C channel
33 seringetis on 7" rims good for airing down to 10 psi just takes a while to pump back to road prussure.
Front tersons bars are cranked up about 30mm
ball joint now just check the front height gain another 10mm
body lift 50mm
but have 1 problem
gear bos shagged lost sinkros in 2nd, 3rd, 4th
Transfer chain slipping baddly ie cant use 4x4 at all
jono
mods so far
93 long wheel base rear spring in rear for the gain of 50mm height
lose the front and read bars for a nice 6mm steel C channel
33 seringetis on 7" rims good for airing down to 10 psi just takes a while to pump back to road prussure.
Front tersons bars are cranked up about 30mm
ball joint now just check the front height gain another 10mm
body lift 50mm
but have 1 problem
gear bos shagged lost sinkros in 2nd, 3rd, 4th
Transfer chain slipping baddly ie cant use 4x4 at all
jono
Posted: Sun May 07, 2006 11:40 am
that sucks. ive got 93 soft top 3ltr v6 man
33" seringetis
raised lwb king springs
balljoint flip
removed front and rear sway bars
but my inner cv gave up and im having trouble finding a decently priced replacement now so i have no wheel drive
33" seringetis
raised lwb king springs
balljoint flip
removed front and rear sway bars
but my inner cv gave up and im having trouble finding a decently priced replacement now so i have no wheel drive
Posted: Sun May 07, 2006 2:56 pm
I have a complete transfercase in good nick plus a smashed 1 which did have a good chain spare
J Top
J Top
Posted: Mon May 08, 2006 6:25 pm
hello there jtop
how much for the good tranny case.
and have u any ideas on were i can find a gear box too.
were bout are u too so i can work out shipping
how much for the good tranny case.
and have u any ideas on were i can find a gear box too.
were bout are u too so i can work out shipping
Posted: Tue May 09, 2006 11:22 pm
Wgtn
you might get a better deal buying them both together somewhere.
I thought the T/F case was $300=$400. done 90ks
J Top
you might get a better deal buying them both together somewhere.
I thought the T/F case was $300=$400. done 90ks
J Top
Re: Ball Joint Flip
Posted: Wed Apr 16, 2008 8:15 pm
hi does anyone have any pics that they can show me of a ball joint flip thanks steve
Re: Ball Joint Flip
Posted: Fri Apr 18, 2008 12:48 am
viewtopic.php?f=18&t=2159&st=0&sk=t&sd=a&hilit=pajero#p17117
check this link out great story on mods done by NJV6
check this link out great story on mods done by NJV6
Re: Ball Joint Flip
Posted: Fri Apr 18, 2008 10:34 pm