Clutch plate - which way round?

Beer_Cruiser · Post by **Beer_Cruiser** » Sun Jun 27, 2010 6:34 pm

Which side goes to the flywheel?

sig · Post by **sig** » Sun Jun 27, 2010 6:39 pm

the side that sticks out the most goes towards the cltuch cover .There is not enough room the other way ,the centre hub will hit the flywheel bolt heads.hard to tell from the photo .give us a side profile of the ctuch plate

ClassicCruiserSpares · Sun Jun 27, 2010 6:44 pm

Its too hard to tell from those pics but the flatest side goes to the flywheel.

Sadam_Husain · Post by **Sadam_Husain** » Mon Jun 28, 2010 5:32 pm

Still got Phils input shaft here.... I booked it out for another week :mrgreen:

curly12 · Post by **curly12** » Mon Jun 28, 2010 5:37 pm

Sadam_Husain wrote:Still got Phils input shaft here.... I booked it out for another week

Poor Phil, use lots of lube, can you still walk strait??? :oops:

Beer_Cruiser · Post by **Beer_Cruiser** » Mon Jun 28, 2010 8:54 pm

Its official I am the dumbist of the dumb c#@ts
Apparently when they panit FW on the clutch plate its the side that goes against the flywheel. Who would have guessed.
And if you put it on the wrong way then try to force the gearbox in to gear it will bend a new clutch plate...

mudlva · Post by **mudlva** » Mon Jun 28, 2010 9:02 pm

laughin with ya there bud
i do sutpid things like thats as well

glade theres more than just me out there
:lol:

coxsy · Post by **coxsy** » Mon Jun 28, 2010 9:11 pm

i pulled a mk1 cortina engine down then pulled it out of the engine bay to find the flywheel was loose , :oops:

changed the ring gear a few weeks before , off course I tightened the bolts right :oops:

skid · Post by **skid** » Mon Jun 28, 2010 9:23 pm

nearly as funny as those guys who re-drilled a falcon 6 flywheel only to find if they had turned it round some more it would of lined up :lol:

Sadam_Husain · Post by **Sadam_Husain** » Mon Jun 28, 2010 10:18 pm

Beer_Cruiser wrote:Its official I am the dumbist of the dumb c#@ts
Apparently when they panit FW on the clutch plate its the side that goes against the flywheel. Who would have guessed.
And if you put it on the wrong way then try to force the gearbox in to gear it will bend a new clutch plate...

Shit I'm sure I had that clutch plate the right way around when I passed it to you? :oops:

skid · Post by **skid** » Mon Jun 28, 2010 11:27 pm

Sadam_Husain wrote:
Beer_Cruiser wrote:Its official I am the dumbist of the dumb c#@ts
Apparently when they panit FW on the clutch plate its the side that goes against the flywheel. Who would have guessed.
And if you put it on the wrong way then try to force the gearbox in to gear it will bend a new clutch plate...

Shit I'm sure I had that clutch plate the right way around when I passed it to you?

skid wrote:nearly as funny as those guys who re-drilled a falcon 6 flywheel only to find if they had turned it round some more it would of lined up

Clutch plate - which way round?

Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?

Re: Clutch plate - which way round?