Wanted: Tidy 40 Series Cruiser
Wanted: Tidy 40 Series Cruiser
Hi guys,
Finally in a position to buy a nice Cruiser, looking for something that preferably has a lot of work done to it as my fab skills are non existant and I don't have the facilities.
Something like what Fakey on here has just sold is basically what I'm after.
Ideally something with Rego WOF and LVVC, I just want to hand over the cash and drive.
Would also consider a nice 70 series or SASed Surf. Modded 80s are probably out of my price range.
EDIT: Also... maybe.. a TJ Wrangler
Cheers
Finally in a position to buy a nice Cruiser, looking for something that preferably has a lot of work done to it as my fab skills are non existant and I don't have the facilities.
Something like what Fakey on here has just sold is basically what I'm after.
Ideally something with Rego WOF and LVVC, I just want to hand over the cash and drive.
Would also consider a nice 70 series or SASed Surf. Modded 80s are probably out of my price range.
EDIT: Also... maybe.. a TJ Wrangler
Cheers
- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
There was a very well set up FJ40 for sale on TM at the same time as Fakey had his up for same - 12K - V8, lockers, winch, york compressor, cage, soft top, winch etc etc and I'm fairly sure it belongs to Dayal who works at - or used own Gold Coast Mechanics in Paraparaumu (north of Wgnt) (4WD specialists). If it wasn't his they're likely to know of the vehicle as they're likely to have worked on it (see http://www.finda.co.nz/business/listing ... nical-ltd/). I looked in my browser history and the classification appears to have expired so I can't send you a link to the original page.
Re: Wanted: Tidy 40 Series Cruiser
cooksworld wrote:There was a very well set up FJ40 for sale on TM at the same time as Fakey had his up for same - 12K - V8, lockers, winch, york compressor, cage, soft top, winch etc etc and I'm fairly sure it belongs to Dayal who works at - or used own Gold Coast Mechanics in Paraparaumu (north of Wgnt) (4WD specialists). If it wasn't his they're likely to know of the vehicle as they're likely to have worked on it (see http://www.finda.co.nz/business/listing ... nical-ltd/). I looked in my browser history and the classification appears to have expired so I can't send you a link to the original page.
Are you talkin about the white one with red bars? If so thats been sold to someone on here

Didn't barbie drive a jeep??
- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
Fakey wrote:Are you talkin about the white one with red bars? If so thats been sold to someone on here
Yip - that was the one

- ClassicCruiserSpares
- Sausage Shack
- Posts: 1259
- Joined: Sat Jan 16, 2010 9:16 pm
- Location: Christchurch,
Re: Wanted: Tidy 40 Series Cruiser
Hey mate, what sort of coin are you wanting to spend? that normally determines what sort of truck you get with mods etc.
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Re: Wanted: Tidy 40 Series Cruiser
ClassicCruiserSpares wrote:Hey mate, what sort of coin are you wanting to spend? that normally determines what sort of truck you get with mods etc.
It really depends on the truck in question. I would be inclined to spend more on a nice 40 compared to say a Hilux, just for the novelty value.
- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: Wanted: Tidy 40 Series Cruiser
I know you have said you want Rego & WOF plus no fab skills but...
Do you have any mechanical skills? or any mates that have played with 350 Chevs? If so I'd be inclined to find out a bit more about below truck - Find out why its got no WOF and what price he'll take for it then work out what an engine rebuild with some performance parts might cost...
http://www.trademe.co.nz/Trade-Me-Motor ... 338905.htm
I like the look of it, and would be a great truck if nothing required for WOF and you have skills to sort 350 out.
Do you have any mechanical skills? or any mates that have played with 350 Chevs? If so I'd be inclined to find out a bit more about below truck - Find out why its got no WOF and what price he'll take for it then work out what an engine rebuild with some performance parts might cost...
http://www.trademe.co.nz/Trade-Me-Motor ... 338905.htm
I like the look of it, and would be a great truck if nothing required for WOF and you have skills to sort 350 out.

- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: Wanted: Tidy 40 Series Cruiser
Or offer this guy $7k for his truck (as apparently that's what he paid for it 2 months ago):
http://www.trademe.co.nz/Trade-Me-Motor ... 132048.htm
http://www.trademe.co.nz/Trade-Me-Motor ... 132048.htm

Re: Wanted: Tidy 40 Series Cruiser
I can do basic stuff, but rebuilding a motor is way beyond me, unfortunate because that looks like it has a tidy body, winch, FF rear axle, power steer etc.
As for the one in Chch.. I drove past it a couple weeks ago and it is one huuuuge bitch, not so keen on the sprung over aspect.
As for the one in Chch.. I drove past it a couple weeks ago and it is one huuuuge bitch, not so keen on the sprung over aspect.
MNC wrote:I know you have said you want Rego & WOF plus no fab skills but...
Do you have any mechanical skills? or any mates that have played with 350 Chevs? If so I'd be inclined to find out a bit more about below truck - Find out why its got no WOF and what price he'll take for it then work out what an engine rebuild with some performance parts might cost...
http://www.trademe.co.nz/Trade-Me-Motor ... 338905.htm
I like the look of it, and would be a great truck if nothing required for WOF and you have skills to sort 350 out.
- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: Wanted: Tidy 40 Series Cruiser
smurf182 wrote:I can do basic stuff, but rebuilding a motor is way beyond me, unfortunate because that looks like it has a tidy body, winch, FF rear axle, power steer etc....
Could see if someone on here wanted to do a cashie for you???
The following looks to be a reasonable truck too - just not my taste being a diesel:
http://www.trademe.co.nz/Trade-Me-Motor ... 095108.htm

Re: Wanted: Tidy 40 Series Cruiser
The following looks to be a reasonable truck too - just not my taste being a diesel:
http://www.trademe.co.nz/Trade-Me-Motor ... 095108.htm
for 7g thats a cheep truck have been out down ashursht a cpl of times when he was down there seems to go well
with lots of mods as well body a little rough but rest is mint
http://www.trademe.co.nz/Trade-Me-Motor ... 095108.htm
for 7g thats a cheep truck have been out down ashursht a cpl of times when he was down there seems to go well
with lots of mods as well body a little rough but rest is mint
- niblik
- Sausage Shack
- Posts: 3307
- Joined: Wed May 03, 2006 12:00 pm
- Location: erm.. out in the shed for a mo...
Re: Wanted: Tidy 40 Series Cruiser
i like this one..

http://www.trademe.co.nz/Browse/Listing ... =299568690
but prefer this one...

http://www.trademe.co.nz/Browse/Listing ... =301019347

http://www.trademe.co.nz/Browse/Listing ... =299568690
but prefer this one...

http://www.trademe.co.nz/Browse/Listing ... =301019347


- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: Wanted: Tidy 40 Series Cruiser
You haven't mentioned budget but I see this has come up for sale today...
http://www.trademe.co.nz/Trade-Me-Motor ... 671580.htm

I miss this
http://www.trademe.co.nz/Trade-Me-Motor ... 671580.htm

I miss this


Re: Wanted: Tidy 40 Series Cruiser
allmud wrote:The following looks to be a reasonable truck too - just not my taste being a diesel:
http://www.trademe.co.nz/Trade-Me-Motor ... 095108.htm
for 7g thats a cheep truck have been out down ashursht a cpl of times when he was down there seems to go well
with lots of mods as well body a little rough but rest is mint
Just been an had a look at this one this avo, Its been built quite well. Nissan coil setup on standard bj40 diffs with 4 linked rear. The body is a bit rough an has been rolled foward onto the front lh corner. The cage has moved slightly but its pretty solid. Bonnet is stuffed. The motor is very clean with only a minor oil leak from the side cover on the engine. Tyres are pretty worn in the centres.
I wouldnt want to have to re-cert it as there are a few things that wouldnt get thru these days that are on the cert plate
Good news for me is one of my mates is goin to buy it


Really only needs a good body tidy up.
Good motivation for me to get my project moving along

Didn't barbie drive a jeep??
Re: Wanted: Tidy 40 Series Cruiser
MNC wrote:You haven't mentioned budget but I see this has come up for sale today...
http://www.trademe.co.nz/Trade-Me-Motor ... 671580.htm
I miss this
Saw it on TM last night, will be making some phone calls today..

I've never heard of a 307 SBC, are they quite rare?
- ClassicCruiserSpares
- Sausage Shack
- Posts: 1259
- Joined: Sat Jan 16, 2010 9:16 pm
- Location: Christchurch,
Re: Wanted: Tidy 40 Series Cruiser
smurf182 wrote: I've never heard of a 307 SBC, are they quite rare?
I think from memory its a 305 chev thats been bored out to 307.
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
- Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Re: Wanted: Tidy 40 Series Cruiser
ClassicCruiserSpares wrote:smurf182 wrote: I've never heard of a 307 SBC, are they quite rare?
I think from memory its a 305 chev thats been bored out to 307.
Nah it was a different engine to the 305, it was a stroked replacement for the 283's in the 1960's

- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: Wanted: Tidy 40 Series Cruiser
smurf182 wrote:Saw it on TM last night, will be making some phone calls today..![]()
I've never heard of a 307 SBC, are they quite rare?
Not sure why he has listed it like that - When I bought it it came with a receipt for the engine conversion which listed it as a 350 Chev.
My brother in law thought it looked smaller than a 350 so maybe he is right.
Only thing it really needs is power steering (front locker makes it heavy when in 4wd). Would be good with a bit more lift and some 35-36" aggressive mud tires too. Other than that it is a very tidy truck. I used to get a smile on my face every time I got in it.

Re: Wanted: Tidy 40 Series Cruiser
my old ones up for sale already for 3k less than he paid for it
http://www.trademe.co.nz/Browse/Listing ... =304112385

http://www.trademe.co.nz/Browse/Listing ... =304112385
Didn't barbie drive a jeep??
- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
Fakey wrote:my old ones up for sale already for 3k less than he paid for it![]()
http://www.trademe.co.nz/Browse/Listing ... =304112385
OMG! How long has he had it for? 6 weeks or so and there goes 3k... hope he enjoyed it

Re: Wanted: Tidy 40 Series Cruiser
cooksworld wrote:Fakey wrote:my old ones up for sale already for 3k less than he paid for it![]()
http://www.trademe.co.nz/Browse/Listing ... =304112385
OMG! How long has he had it for? 6 weeks or so and there goes 3k... hope he enjoyed it
Suits me just fine

- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
smurf182 wrote:cooksworld wrote:Fakey wrote:my old ones up for sale already for 3k less than he paid for it![]()
http://www.trademe.co.nz/Browse/Listing ... =304112385
OMG! How long has he had it for? 6 weeks or so and there goes 3k... hope he enjoyed it
Suits me just fine
Cool - are you going to have a look at it? I suppose if you were interested in the original vehicle then you'll be happy to see it relisted at this price - good luck

- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
It's a bargain really... shipped across, closer to home... and only a few more k's on the clock by the look of things.
Re: Wanted: Tidy 40 Series Cruiser
$9400 is a bargain alright! 

Re: Wanted: Tidy 40 Series Cruiser
Id say the reserve is 9k. Looks like he cleaned it tho 

Didn't barbie drive a jeep??
- cooksworld
- Hard Yaka
- Posts: 205
- Joined: Fri Dec 02, 2005 12:00 pm
- Location: Wellington
- Contact:
Re: Wanted: Tidy 40 Series Cruiser
SOLD already... that was short and sweet!
Re: Wanted: Tidy 40 Series Cruiser
He won't have to drive it far to get muddy over there.