Page 1 of 1
L200 4d56 PCV valve ?
Posted: Sat Jul 10, 2010 8:02 pm
by wildplumdx
so i have got tons of blow by so i thought i had low compression, did a check got 420psi at 10revs over all cylinders so thats cool, checked my pcv valve.....what pcv valve ? there is none! is that the problem ? or do they just not have them ?
Re: L200 4d56 PCV valve ?
Posted: Sat Jul 10, 2010 10:40 pm
by mudbugga
They don't have them.
I just vented my breather out to atmosphere (long hose drops down the engine bay to underneath). You could put it into a catch tank, if you want, then reroute into the intake.
Stops the intake filling with oil and makes them go better too.
Your motor must be getting tired, like mine (it's done 300km+) but still goes sweet.
You know it's getting bad when the dipstick wont stay in the tube
I've seen that on a few that have done lots of km's.
Re: L200 4d56 PCV valve ?
Posted: Sat Jul 10, 2010 10:50 pm
by wildplumdx
oh really ? bummer oh well i have a spare 2 engines as there so cheap to buy IF you watch trade me close enough
but i got a good compression reading or does that mean jack ? yeah ordered a oil catch can off ebay as they get disgusting in the intake real quick, cleaned mine out but didnt take long to go poo again probably didn't help the poor thing running 20psi for 6 months
