6th /7th nov

[coxsy]

morning work 30 mm coil spacers to the rear springs on the safari , add to much weight for the springs

[meece4x4]

added the 8mm rubber blocks that Suzuki1k so kindly sent me free of charge I might add (good Bastard) to the rear coils on the safari, didn't have any spare donuts for the front so made up a packing ring and slipped it under the original flogged out donut ... my god what a difference, the vibration on acceleration is gone the clunking under my foot has *almost* gone instead of a steel against steel clunk it's now a steel against rubber thunk and the whole truck has way less rattles and just drives soo nicely now.

doing a oil and filter change as well as we are heading south to the 'Naki, looking at buying a rental investment/winter holiday home around Stratford or Eltham so will be looking at a few properties on our way then onto Wellington to see Bro-in-law next weekend,

Zook can stay broke for the time being

[snork]

replaced handbrake and cable..still not very good
looking forward to league tonight

[rotordogg]

Went out to help set up our club 'fun trial', Broke rear diff! came back to work after setting up to fix.

That's two years in a row I've broken my truck while helping to set up fun trials!
Maybe I'll just walk next year!

[Heath]

The missus is back in Auck to help pack up for the move. Last of the junk food and batchelor dinners was enjoyed last night, now its back to crappy healthy shite.

Not looking forwards to the next few days. I hate packing houses for moves. It always seems like my stuff that gets thrown away.

Checked the cookstrait forecast and there are two to choose from, one flat and calm the other not so good (rough) on the same website - go figure?

[kbushnz]

Spent the morning putting in new handbrake shoes in the Prado Bus.
The old ones were almost down to the metal.
The new ones are a tight fit ......Had to back off all the adjustments.
They only just get in....
Should have a good handbrake for the next few WOF'S
Only found one place that sells them in NZ.
Otherwise its Toyota original $$$$ or reline them.

Later is put the front bar work back on after a winch clean up and getting ready to fit the plastic rope.

Did you know you can chrome aluminium.

Calvin

[coxsy]

your can chrome any metal given time

[kbushnz]

Making an aluminium Hawse fairlead for the plastic rope.
Was going to get it hard anodised.
But my plating man said "Why not hard chrome it" It will last for ages....(wear resistant)
And hey presto, hawse to be hard chromed when I finish polishing it.

Calvin

[coxsy]

your plating mans not a short walk from your workshop is he

[howieh]

Pulled the front off the prado, water pump leaking so far have it in bits, have to see son-in-law for crank shaft pulley.

[mudslut]

Thursday i got my new mudstars fitted to the samurai to save fckn the simexs
Today i fitted two new UJs to the drive shafts for the WOF and then greased the rest of them will carry on with more maintanance tomorrow

[red-devil]

went for a nice drive down the wiapara river out to the sea then along the beach. its been a while since the last time i was out there.

[juz]

Pulled the Headlight squirer and Air-con out of the 70 yesterday,(in prep for 1uz?) left them sitting outside work, head into work today and there gone! jesus times must be tough when u steal that sorta crap, .5kg of alloy...

[Jerry]

Working bee with Abbo's POS today, Skid wasnt there so had to sort out the BBQ My 70 got a good run there and back vai the long way round

[kbushnz]

your plating mans not a short walk from your workshop is he

He sure is

Calvin

[nicinnz]

Saved a kid from the Arrow River
Went for a drive up the Arrow first crossing was a guy with his kid on motorbike that got drowned, Guy was more concerned about pushing his bike thru the river than tying to keep his kid from drowning I ended up driving up to the bloke and his kid that was in helmet and full body armor that was getting swept away by the swift current and plucked him out of the river.
What kinda father would take his kid thru a swollen river on a motorbike eh?b and be more worried about pushing the bike out than making sure their kid was safe?

[taitantoyota]

went for a nice drive down the wiapara river out to the sea then along the beach. its been a while since the last time i was out there.

that is one cool surf. does it have a solid axle ? or lots of cvs in the boot?

[rokhound]

There aint too much about that surf that is std. It was built by an engineer who had too much time on his hands, but he made a nice job of it.

[red-devil]

it sure is a nice surf a ever well built.

[rayndeb]

Went on Waipara trip. had awesome time .Pushed Cruiser hard cause wife was at work . Did some track maintainence .No damage . Need to get out more .Going to be awesome sight with 50ish trucks for day of wedding .

[NJV6]

Went flying

[meece4x4]

Went flying

AND CRUNCH IN 3.....2.......

lol cool photo

[mudslut]

Big day on the samurai today changed front and rear diff oil,transfer case oil and gear box oil,fitted a oil presure gauge,fixed the rocker cover oil leak all in all a bloody good weekend on the truck might have another beer now

[lincooln]

well Saturday took the hubs off the trailer and re greased the wheel bearings. quieter now.

then today went and helped my bro pick up his new Lada, this one is a bit more special than his other, I will let him tell about it though.

anyone interested in a dingy?

[SP450andLE]

Picked up the new Lada today. This one is a 'Fiva', a Niva with a Twin Cam, 2 litre Fiat engine. (Cloggy's conversion for those who know anything about it.) I got it from Stu Good, and it came with HEAPS of spare parts. Not running currently, but will be soon. I will start a build thread soon, with some pics. So, all in all, a pretty productive weekend.

[Jerry]

Was this Cloggy's old lada?

[rokhound]

Been going hard out rewiring everything in the mutt over the last week, and couldn't face the soldering iron and blow torch this week end, so I sorted out the coil overs and shock towers. The towers have now been re-done 3 times, but I think they will finally do what I want (well hopefully any ways)

[SP450andLE]

Was this Cloggy's old lada?

Indeed it was. I'm guessing you know about it then...?

[Jerry]

Havent seen him for a whilst and he's been quiet lately on here but will find his no and mention it to him that his old lada has resurfaced .... his username is cloggynz if you wanted to PM him

[SP450andLE]

Okey dokey. Will do