Page 1 of 1
Injector pump leaking options
Posted: Wed Feb 02, 2011 2:26 pm
by scooby88
Failed my WOF for a leaky pump, and got quoted $1100 to rebuild!! I can't afford this and need some options.
If I was to swap for a 2nd hand would I need to do anything like priming or bleeding - I've never touched an Inj. Pump before?
Its off a 2lt ln130
Re: Injector pump leaking options
Posted: Wed Feb 02, 2011 6:21 pm
by bigstu
wheres it leaking from? my 1kzte had leak at the top failed warrant only cost $120 to get them done as it was just a couple of orings.
Re: Injector pump leaking options
Posted: Wed Feb 02, 2011 6:33 pm
by scooby88
Thanks mate, Yup top somewhere. Cant see much - do you suggest taking out doing O rings putting back ??
Re: Injector pump leaking options
Posted: Wed Feb 02, 2011 9:29 pm
by bigstu
garage done mine ive heard somewhere that the tops just come off with a few pipes wires and bolts removed and then theres probly 3 or 4 seals to replace on the part removed were sensors and pipe screw on
Re: Injector pump leaking options
Posted: Thu Feb 03, 2011 8:33 am
by kbushnz
Do it yourself...
Get a kit. Here is a link to what they look like inside. If its the electronic type.
http://www.teoc.ws/community/topic/2345 ... rhaul/HereBut you don't need to tear down that far.
Cleanliness is the key.
The side and top cover are the ones that tend to leak.
Have fun
Calvin