Page 1 of 1
Problems with your locker?
Posted: Sun Mar 06, 2011 4:39 pm
by Matt2012
I have sourced a supplier of required parts to turn your electric locker (Vacuum) into a manual controlled unit in cab! This is a lot cheaper than mucking around with the solenoids and electrical issues, Takes fifteen minutes to install.
So simple to use and engages/disengages so much faster than to factory unit!
Mail me if you’re interested
matt.whitaker@cookbrothers.co.nz
Re: Problems with your locker?
Posted: Sun Mar 06, 2011 8:15 pm
by coxsy
why, mine with a mac valve is as fast as my air locker
Re: Problems with your locker?
Posted: Tue Mar 08, 2011 4:24 pm
by flyingbrick
guessing you turn it into a cable locker?
Re: Problems with your locker?
Posted: Tue Mar 08, 2011 6:13 pm
by Swamped
Thats what i guessed too. Some explaining would be good.
Re: Problems with your locker?
Posted: Sat Mar 19, 2011 2:11 pm
by gary_in_nz
actually, my brother has an issue with the factory locker in his safari, seems the switch below the radio area needs the little light bulb to be in working order to complete the circuit. is this correct??
Re: Problems with your locker?
Posted: Sat Mar 19, 2011 3:54 pm
by Taz
coxsy wrote:why, mine with a mac valve is as fast as my air locker
For how much.....?
Re: Problems with your locker?
Posted: Sat Mar 19, 2011 5:18 pm
by niblik
lol... thought it said cock brothers on the email addy...
Re: Problems with your locker?
Posted: Sun Mar 20, 2011 10:51 am
by coxsy
my first MAC valve i brought was $96 now $108
done TAZ
Re: Problems with your locker?
Posted: Tue Jul 26, 2011 10:46 am
by Tow truck
Hi sorry to bring this up again but new to this site and have a question about my locker. As far as i can tell both of my air sucky things on the fire wall are working and i have pulled the hoses off at the diff to make sure its working down there. But my locker isnt engaging so what im wondering is how much pressure does it take or what inside the diff area would fail for this to happen. Cheers
Re: Problems with your locker?
Posted: Tue Jul 26, 2011 6:28 pm
by DaveM
Have you tried swapping the hoses around on the 2 solenoids? Has it previously worked?
Re: Problems with your locker?
Posted: Tue Jul 26, 2011 7:10 pm
by doddzee
Does it make any noise at all? The dog teeth do break if you use them hard enough
Re: Problems with your locker?
Posted: Wed Jul 27, 2011 1:16 am
by Tow truck
Hi yip use to work no worries and now has just stopped. Had the diff rebuilt about 1 year ago because of broken teeth and when put back together worked as normal. Have tried swapping hoses around. is there some sort of diaphram in the unit on the diff that could have gone causing it to crap out. Cheers for the help
Re: Problems with your locker?
Posted: Wed Jul 27, 2011 5:08 pm
by coxsy
Re: Problems with your locker?
Posted: Wed Jul 27, 2011 6:04 pm
by DaveM
Re: Problems with your locker?
Posted: Thu Jul 28, 2011 12:44 am
by Tow truck
Ok cheers guys. Have leant more just here than ringing and going to see people for the last week
