Offroad-Express

My 2F is running a 2 barrel Holley Carb.

I'm going to buy a Carb Kit to rebuild it but want to make sure I'm buying the right kit.

I'm guessing it is a 350 but this is the only numbering I can find on it. Can anyone tell from this what model 2 barrel it is from this pic?



Also, let me know if you have a recommended place to buy the kit from as well.

Cheers,

Dont know if this will help

http://www.holley.com/HolleyCatalog/Cat ... eNumber=22

Give it a try

Cheers Daniel

Lynx wrote:Dont know if this will help

http://www.holley.com/HolleyCatalog/Cat ... eNumber=22

Give it a try

Cheers Daniel

Thanks Dude. To be honest I couldn't tell the 350 and the 500 2 barrel carbs apart.

Does anyone know if the rebuild kits are the same for all Holley 2 barrel carbs?

If so any recommendations on where to buy the rebuild kit from?

Cheers,

those nos are just casting nos .the no you need is normally stamped on the vertical face where the choke plate hinges above the carb throat/venturi you will probably find that most of the parts are the same between the 350 and 500 holley ,main difference will be the throat size as this will determine cfm rating and that the gaskets for this area will be slightly different size ,hope this helps cheers sig

big differences between 2300 series carbs one has power valve and the other hasnt the sure way is to get the list number which is on the top throat (?) casting most proformance shops or repco can get a carb kit about $70

sig wrote:...the no you need is normally stamped on the vertical face where the choke plate hinges above the carb throat/venturi ...

Cheers Sig.

Have found the following:

"List 4412 - S"
" 185 "

Am I getting any closer?

Check out page 18
http://books.google.co.nz/books?id=oVZr ... 0S&f=false

mylux wrote:Check out page 18
http://books.google.co.nz/books?id=oVZr ... 0S&f=false

Perfect! Thanks