18th/19th

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
Post Reply
User avatar
Bolo
2XL
Posts: 697
Joined: Mon Mar 31, 2008 8:00 pm
Location: Welly

18th/19th

Post by Bolo »

thought i would start this one, i know its a bit early , but i thought it had to go in here anyway ... today i changed the back up starter motor in the beast , as it started to play up and sound like all the parts were having a mud fight :lol: , so i rebuilt my one that came with the truck yesterday , so that went in today , and tomorrows job will be to rebuild the back up one, then it will be all sorted , till the next mud trip :roll: , also it got a wash today , and a check over on the hoist at work , and everything seems to be the same as last time i checked everything out 8) . so i think the plan for the rest of the weekend to come will be work saturday morning , then picking up a car in the afternoon for a friend , then not sure what the plan is for sunday , ill guess ill have to wait and see what the rest of the week will bring :mrgreen:
Your name is Bolo and it will stay that way until you have earnt the right to be called your real name........................ Bolo
Top
User avatar
petefj40
Ms Daisy
Posts: 4218
Joined: Mon May 01, 2006 12:00 pm
Location: The Mainland

Re: 18th/19th

Post by petefj40 »

Looking forward to this weekend. Hope to be achieving a lot.
This week I installed the rear view mirror, rear driving lights. Fixed the air leak in the locker line and the land anchor sorted. Trailer all reg'd and warranted. Ready to go!! We all bugger off after work tomorrow to Springs Junction.
Top
User avatar
chrome
Hard Yaka
Posts: 946
Joined: Wed Jul 20, 2005 12:00 pm
Location: the swamp

Re: 18th/19th

Post by chrome »

all finished this week
Image
DIRTY OLD HILUX
022 519 7700
Top
User avatar
Cleary
Hard Yaka
Posts: 175
Joined: Wed Sep 16, 2009 1:31 pm
Location: Kapiti Coast

Re: 18th/19th

Post by Cleary »

Spent the day at field days with Pedro and Gazza. Didn't spend much myself. Shedloads to see, walked for miles. Caught up with badnuz. Pedro is enjoying his new ARB jacket skid! :lol:
KZJ95 Prado, 1980 SWM TL320, 1985 Fantic 301
Top
User avatar
RJT
Hard Yaka
Posts: 245
Joined: Sun Jan 07, 2007 12:00 pm
Location: Christchurch

Re: 18th/19th

Post by RJT »

chrome wrote:all finished this week
Image



Looks good!!! :D
2008 R51, 2.5TD. 265/70R17 R/T's, 1.5" Rancho lift, Ironman snorkel and Deluxe winch bar, SCA 12,000lb winch and 9" LED spotlights, Kings awning, Alpinestar roof box, GME TX3100 UHF.
Top
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:
Contact skid

Re: 18th/19th

Post by skid »

Cleary wrote: Pedro is enjoying his new ARB jacket skid! :lol:


:evil: :evil: :evil: :evil: :evil: :evil: :evil:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
Top
User avatar
sig
Jeep Jeep
Posts: 1488
Joined: Thu Oct 06, 2005 12:00 pm
Location: stokes vegas

Re: 18th/19th

Post by sig »

Cleary wrote:Spent the day at field days with Pedro and Gazza. Didn't spend much myself. Shedloads to see, walked for miles. Caught up with badnuz. Pedro is enjoying his new ARB jacket skid! :lol:

:lol: :lol: :lol: :lol: :lol: :lol:
FJ40,INJECTED SB 406 CHEV, LOCKER,35 SIMEXS,warn winch , 80seies vx 4.2 24v turbo diesel ,fr and rear lockers 3" exh top mount intercooler, 021 724482
Top
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 18th/19th

Post by wopass »

Image

Image

gotta get some top hats off 4wdfiberglass tomorrow
If you already know everything, DON'T ask bloody questions!!
Top
User avatar
UBZ
Hard Yaka
Posts: 1648
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 18th/19th

Post by UBZ »

wopass wrote:Image


I reacon it would be far cooler with black silicone pipes instead .

blue are for ricers :mrgreen:
LR110 ..... LJ50 project :roll:
Chris.
Top
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 18th/19th

Post by safaripete »

went for a drive down to wainuiomata to pick up the transfercase for the zook thanks baulz
Top
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 18th/19th

Post by wopass »

couldn't find black 90deg 4"-3" reducers so its blue.
If you already know everything, DON'T ask bloody questions!!
Top
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: 18th/19th

Post by haynzy »

wopass wrote:Image

Image

gotta get some top hats off 4wdfiberglass tomorrow

i dont give a rats donkey what kermit and the other muppets say, that is one sick lookin 4wd hotrod :twisted: uber blingus snorkels 8)
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
Top
User avatar
corosafari
Hard Yaka
Posts: 168
Joined: Wed Jun 10, 2009 6:21 pm

Re: 18th/19th

Post by corosafari »

Ship in port of Wellington so walked down to nearby ARB dealer , checked out there Taupo 1000 race truck , purchased highlift jack. Not a major achievment apart from carrying the dam thing back to ship, arms about 4" longer.
Back onboard for another round of drooling over Wopass photos above :mrgreen:
Top
User avatar
Suza
Hard Yaka
Posts: 476
Joined: Thu Jan 31, 2008 11:03 am
Location: Some where around the Lakes or on the Hill

Re: 18th/19th

Post by Suza »

Got all excited yesterday and got the Bighorn all ready for action :) . Then this morning after 5mins I mangaed to distroy a CV :cry:, so the Bighorn is now back in the shed with the CV out and a new one about to be ordered
Top
User avatar
92 safari 17
Hard Yaka
Posts: 220
Joined: Mon Dec 21, 2009 7:49 pm
Location: Otorohanga, Waikato
Contact:
Contact 92 safari 17

Re: 18th/19th

Post by 92 safari 17 »

Went thompsons track friday nyt, then my truck was stolen friday night/ sat morning :evil:
Prior Preperation Prevents Piss Poor Performance. My Solution: Build a Tougher Truck
Top
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: 18th/19th

Post by kbushnz »

92 safari 17 wrote:Went thompsons track friday nyt, then my truck was stolen friday night/ sat morning :evil:


Wot from the track? or Home....

Bummer :cry: ....

Pulled front bar off and moved radiator out the way so I can get in and do some grinding / drilling for the winch rope path to the mid mount winch.
Have a play at some welding next week.... :mrgreen:

Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
Top
User avatar
92 safari 17
Hard Yaka
Posts: 220
Joined: Mon Dec 21, 2009 7:49 pm
Location: Otorohanga, Waikato
Contact:
Contact 92 safari 17

Re: 18th/19th

Post by 92 safari 17 »

Stolen from Hamilton east outside a mates flate :cry:
Prior Preperation Prevents Piss Poor Performance. My Solution: Build a Tougher Truck
Top
User avatar
FORGE1
Hard Yaka
Posts: 630
Joined: Fri Feb 27, 2009 6:44 am
Location: Whangarei

Re: 18th/19th

Post by FORGE1 »

92 safari 17 wrote:Stolen from Hamilton east outside a mates flate :cry:



Bro that suxs isnt this the 2nd one to get stolen from you??
Don't Bend the Rules, Rule the Bends!!!
Top
User avatar
92 safari 17
Hard Yaka
Posts: 220
Joined: Mon Dec 21, 2009 7:49 pm
Location: Otorohanga, Waikato
Contact:
Contact 92 safari 17

Re: 18th/19th

Post by 92 safari 17 »

yep it is the secound one
Prior Preperation Prevents Piss Poor Performance. My Solution: Build a Tougher Truck
Top
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 18th/19th

Post by coxsy »

started the turbo fittment all fine till exhaust manifold came off broken stud bottom rear one, and stub end recessed in to head
Image
found a few lose nuts while unbolting the manjfold that heat shield is not such a good idea
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Top
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 18th/19th

Post by wopass »

92 safari 17 wrote:Went thompsons track friday nyt, then my truck was stolen friday night/ sat morning :evil:


bro thats a bit more than bad luck, i would start wondering about your circle of friends... might be one of them doing you over?

well today i took the 40Rod thru to ham for a run breathing nice cold air....yup pleased i did it. Runs much nicer :mrgreen: got snork top hats off steve and now home about to remove the pipes and mod them to fit the hats... watch this space
If you already know everything, DON'T ask bloody questions!!
Top
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: 18th/19th

Post by haynzy »

I can actually say I did something on my 4wd today, new front pads others lasted less than a year :evil:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
Top
User avatar
rangimotors
Hard Yaka
Posts: 1631
Joined: Thu May 10, 2007 12:00 pm
Location: chch

Re: 18th/19th

Post by rangimotors »

went in to buy a new roll of mig wire and came out with a new tig welder, time to work out how to drive the beast and start making some new shit. Need to get an argon bottle now. Anyone know how the mig will go on argon rather than co2? I got a duel argon reg so i'm hoping to only run (hire) one bottle.
Never argue with an idiot, they drag you down to their level then beat you with experiance!
Top
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 18th/19th

Post by coxsy »

I've done that when ran out of co2 in a workshop , it burns well, cleans the steel in front of the weld pool an plasma field area like a acid bath dose, cool to watch
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
Top
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: 18th/19th

Post by wopass »

well that was easier than i thought it was gonna be... didnt have to change much at all, change brace brackets and shorten tube a bit... doneburger!!

Image


Image

have to go get them dirty now :mrgreen:
If you already know everything, DON'T ask bloody questions!!
Top
User avatar
rotordogg
Hard Yaka
Posts: 290
Joined: Tue Feb 19, 2008 4:16 pm
Location: Palmerston north.

Re: 18th/19th

Post by rotordogg »

Painted the roof light protector and rope holder I made on friday afternoon. Will refit tomorrow...

Decided to rearrange the layout in the back of the truck as I seem to knock air hoses off or loosen wiring when putting spare cloths/bags in the back of the truck on club runs!!

Remounted computer behind drivers seat, moved fuel tank, air compressor, air/hydrolic ram and pump/filters forward so there's room at the back for storage without getting in the way of wires/hoses.
Tidied up wires/hoses with a few more clips and a bit of conduit...

Found a crap load of dirt hiding above body cross members and exaust shield when cuting them off to move fuel tank forward!!
It's just more fun in a lada !!
Top
SP450andLE
Hard Yaka
Posts: 992
Joined: Fri Sep 24, 2010 10:38 am
Location: Beach Haven and kaiwaka

Re: 18th/19th

Post by SP450andLE »

I cleaned up the Lada alternator, ready to fit.

I just need to wait until I'm free to go to the farm to fit it :roll:

Other than that I scoped the net looking for parts for mine and my Dad's project SP250 (well, actually SP450...).

And I got the project Mini running, so now I can swap that engine into my daily driver Mini. Anyone on the lookout for a Mini Clubman body, complete, minus engine?
:mrgreen: :mrgreen:
tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
Top
Timmy511
Hard Yaka
Posts: 107
Joined: Wed Dec 08, 2010 4:40 pm

Re: 18th/19th

Post by Timmy511 »

this weekend i took my truck for a warrent after doing all the work they gave me last time including certing it.

vtnz, the barstewards, failed it, and gave me another list as long as the last one for various things, mainly rust. i argued till i was blue in the face, in the end all i got was, 'we all make mistakes, i missed it last time i checked it' and 'all i can do is appologise'.

pissed off, all work done, just needs to go to the panel beaters now for some rust love and it might pass depending on if they find anything new this time round.

vtnz - joke. rant over.
Top
User avatar
safaripete
Hard Yaka
Posts: 777
Joined: Sun May 11, 2008 10:54 pm
Location: palmerston north

Re: 18th/19th

Post by safaripete »

went up to kakahi and picked up the front and rear diffs for the zuki today

met spanky (vaughan) top bloke

now to start on some monster changes :twisted:
Top
u13turbo
Hard Yaka
Posts: 744
Joined: Wed Feb 24, 2010 6:51 pm

Re: 18th/19th

Post by u13turbo »

Timmy511 wrote:vtnz - joke. rant over.



I've only ever heard bad things about them, apparently they are jsut drop out mechanics, they dont care about important safety issues but are more fussed with minor things that dont really matter, I will never take my vehicles there, just hope i never get a green sticker...
Top
Post Reply

Return to “This weekends achievements”