Offroad-Express

???samurai/swift g13a dizzy question???????/

OK so the g13 in the swift/barina had a straight dizzy and the one in the sammy has a right angle dizzy. if i use a g13 from a swift can i use the dizzy from the sammy so i dont run into the firewall. ???????????????? also will everything else just bolt up???????????????????/

Is the swift engine a single cam? If it is everything should bolt straight up. Swift sometimes doesn't have a mechanical fuel pump and the waterpumps appear to differ sometimes but thats all I've noticed so far.

Can be a bit of a pig with belts swapping over too due to 5 stud pulley rather than a 4 stud but some swifts come with a 4 so you might be lucky. This is where water pump length can be a mongrel.

yes but in pics ive lookd at single cam dizzy is still different (runs parrallel to the engine) will my dizzy bolt up to the swifts dizzy housing

G13 swifts up to about 87 ish ran an angle dissy just like the 413 . 87-88ish onwards they are straight . Either way your 413 should bolt straight in . Slim chance you will have to swap cam shafts but I doubt it .

Chris