Page 1 of 1
Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 6:27 pm
by Filthy4x4
Hey guys,
Just after the sizes for the body block bolts all round, are they all the same or nah?
Cheers
Caleb
Re: Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 6:39 pm
by mudslut
Same diametre man,just make sure the tensile strength is 8.8 or more
Re: Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 6:42 pm
by Filthy4x4
I havnt pulled any of the bolts out yet, was just after the size so I could grab some from msl on my lunch break.
Re: Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 7:59 pm
by vinceparts
Re: Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 10:00 pm
by SamLogan
8.8 grade needs to be used for all bolts as well as nyloc's. the front 2 are m10 x 120mm, middle 4 are m10 x 130mm and the back 4 are m10 x 160mm. That is for a 50mm lift
Sam
Re: Bolt size for Ln130 surf body blocks
Posted: Thu Nov 24, 2011 10:04 pm
by Filthy4x4
Definitely would only use high tensile bolts, thanks for the info guys
Cheers
Caleb