Page 1 of 1
No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 9:13 am
by tga_4x4
jusr realised i no longer have reverse lights...what are the wire colours from the switch so i can check or retro fit..
Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:04 am
by mudlva
Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:16 am
by coxsy
yellow/red, green/white fuse

Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:29 am
by tga_4x4
coxsy wrote:yellow/red, green/white fuse G

nice pic but cant read it, its to small..i found the 2 wires from g/box...but on my loom the 2 wires are not there..what are the wires for reverse from the auto loom that will have to be inserted ??
Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:32 am
by coxsy
think your screen has a zoom

Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:37 am
by tga_4x4
coxsy wrote:think your screen has a zoom

True it does, but it distorts writing..
Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 10:37 am
by coxsy
f***n photobucket
green /orange green white
Re: No reverse lights after manual conversion on safari
Posted: Mon Jan 02, 2012 11:43 am
by tga_4x4
found it...your correct green/white and green/browny orange... all good and working..now to locate the freaking reverse beeper and make it shut up...,, cheers coxsy for pointing me in the right direction