Offroad-Express

Posted: **Sun Feb 12, 2012 1:57 pm**

need to no what the spacing is for the points on a 86 1800cc petrol z18(s)

Posted: **Sun Feb 12, 2012 2:19 pm**

I searched google, found nothing to help :oops:

Posted: **Sun Feb 12, 2012 3:31 pm**

coxsy wrote:search google, found nothing to help

it's my sons truck he had a look on google but couldn't find anything so hence we have put up on here.

Posted: **Sun Feb 12, 2012 3:54 pm**

ok asked kern she may find someone in the know

Posted: **Sun Feb 12, 2012 4:05 pm**

You will be close at .020" = .51mm. not sure of the conversion but 20thou will do it.

FITZY.

Posted: **Sun Feb 12, 2012 4:10 pm**

If fitting new ponts make sure the contact surface is clean and a small dab of grease on the block that rubs on the distributor cam.

FITZY.

Posted: **Sun Feb 12, 2012 5:04 pm**

coxsy wrote:I searched google, found nothing to help

good to see you had a cm (cindy moment) :mrgreen:

Posted: **Sun Feb 12, 2012 5:04 pm**

thanks guys you rock :mrgreen:

Posted: **Sun Feb 12, 2012 9:23 pm**

yep .18 too .22 thou. so 20 is bang on. if it is the twin points 8 plug model set both up the same and run 98 octane. dwell meter is better

nissan datsun 86 4x4 help