Offroad-Express

Hey all,

I'm in the process of swapping out the motor in a 1996 R50 terrano..
It looks like I'm either going to have to drop the front diff off or the transmission to get it out, cause of sump clearance, is that right? Or is there another trick to it?

Cheers

Jay

Drop the diff. Easy after that.

Cheers,

Thanks dude.. Thought as much!
Easy enough to drop the diff?

Much appreciated!

We just droped the torsions down at the back, undid the gear box mounts, undid the drive shafts ect and slid the gear box back as far as we could.

navara66 wrote:We just droped the torsions down at the back, undid the gear box mounts, undid the drive shafts ect and slid the gear box back as far as we could.

R50's don't have torsions, aren't they struts on the front

Don't know how easy the front diff is in one of those, but I have D21's down to a fine art. Can do one in an afternoon, single handed

Cheers,

[/quote]
R50's don't have torsions, aren't they struts on the front
[/quote]

Yup - Struts on the front.... All good - will make a start tonight and see how it goes!

Cheers guys

Just for anyone reading this thread in the future, dropping the front diff on an R50 terrano is really easy... 4 big bolts and 6 smaller ones per side and it drops right off! (make sure u support it with a jack or it will hit the ground hard)Tool me about 20 mins working alone. Easy

Cheers!

Jay

Jay wrote:

R50's don't have torsions, aren't they struts on the front
[/quote]

Yup - Struts on the front.... All good - will make a start tonight and see how it goes!

Cheers guys [/quote]

Ha Ha sorry for that guys.