Page 1 of 1
wheel offset help please
Posted: Tue Mar 13, 2012 7:45 am
by tatnz
Hello just a quick brain strom,i can get a set of 15X8 with the off set of
-20 or +12 for cheep i wont to run 32s or 33s.At the mo i have a 2'' lift and have a 3'' body lift coming from the usa,so what do u think thanks

Re: wheel offset help please
Posted: Tue Mar 13, 2012 8:52 am
by tatnz
they will be going on a 91 terrano
Re: wheel offset help please
Posted: Tue Mar 13, 2012 4:54 pm
by skid
Re: terrano wheel offset help please
Posted: Tue Mar 13, 2012 4:58 pm
by tatnz
sorry i was in a rush this morning
lets see if that gets the fish bitting

Re: wheel offset help please
Posted: Tue Mar 13, 2012 5:19 pm
by skid
didnt seem to change title on main page
maybe you need to copy and paste original thread into a new one with terrano in the title

Re: wheel offset help please
Posted: Tue Mar 13, 2012 6:48 pm
by tatnz
how do i delete this post
Re: wheel offset help please
Posted: Tue Mar 13, 2012 6:50 pm
by Jerry
Edit the title in your first post and that should fix it
Re: wheel offset help please
Posted: Tue Mar 13, 2012 7:47 pm
by kiwipete
tatnz wrote:Hello just a quick brain strom,i can get a set of 15X8 with the off set of
-20 or +12 for cheep i wont to run 32s or 33s.At the mo i have a 2'' lift and have a 3'' body lift coming from the usa,so what do u think thanks

Good luck getting a cert for a 3" body lift
You will still need guards trimmed for 33's
I do not remember the offset of my rims but I think they are -12, I can check in weekend.
Re: wheel offset help please
Posted: Mon Mar 19, 2012 8:08 pm
by tatnz
So i went and got the cheap wheels and they are 15x8x-19
then went and got some 32/11.5/15 maxxis bighorns mean looking tyre

.
I have 2'' suspension lift and had some rubbing at the front where there is that lower plastic front bumper just under the bullbar and on the plastic wheel arch cover (it was missing a few screws

).
So off they came and a bit of cutting here and there,now there is just a bit of rubbing just before full lock when the wheel is articulating

.
So ill get a 2'' body lift

Here are some pix ill put more up when im in the mud


