Page 1 of 2
Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Jul 16, 2012 11:43 pm
by suzolla
Following on from my 70 Series axle lengths thread
http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=22&t=31346 How much interest would there be in me getting some Longfield Supersets to suit. Just need to remember that you also need to either run their hub gears or drive flanges. The drive flanges make the hub assembly much stronger as they have 6 drive pins extra to the 6 taper lock bolts.
Note that the pre 1990 FJ70 are the same as FJ40.
Now sorted see following post.
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Wed Nov 07, 2012 9:52 pm
by suzolla
Hi,
Following on from above I ordered and have now got custom length axles from Longfield to suit the LJ7x and KZJ7x. The earlier model ones should be a direct fit as the oil seal diameter (33mm) should be the same as Hilux and earlier FJ Cruisers, for the later model ones the oil seal ID is 35mm, so the oil seal wil need to be changed to suit the longfield axles, the OD of both seals is 50mm. The larger seals are the same as the 80 Series seals.
For the earlier ones that don't need seals Cost is $1350 plus post which is about $50.
For the later ones that need different seal Cost is $1350 plus post which is about $50.
You will just need to get early model seals.
The toyota seal no is 90310-35010.
For the longfield warranty need to run Hub Gears ($225) or Drive Flanges ($300)
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sat Nov 17, 2012 8:31 pm
by suzolla
Bump.
See first post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Tue Nov 27, 2012 12:15 pm
by suzolla
Bump.
See first post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Thu Dec 06, 2012 12:27 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sun Dec 16, 2012 8:55 am
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Thu Jan 17, 2013 10:01 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Fri Jan 18, 2013 5:37 am
by imsohi
Hey tim will be looking at getting a set some stage this year most likly with drive flanges i will let you know
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Jan 28, 2013 12:07 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Fri Feb 08, 2013 9:34 am
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sat Feb 16, 2013 2:36 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sun Mar 10, 2013 8:48 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Wed Apr 10, 2013 12:01 am
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sat Apr 27, 2013 9:19 am
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sat May 11, 2013 4:59 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Fri Jun 07, 2013 8:15 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Tue Jun 25, 2013 5:22 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Wed Jul 10, 2013 11:57 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Fri Aug 02, 2013 9:17 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Aug 26, 2013 1:24 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
1 Left
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Sep 16, 2013 4:39 pm
by suzolla
Bump.
See Second post
PM me if interested
Cheers
Tim
1 Left
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Sun Dec 15, 2013 9:04 am
by suzolla
GOT SOME MORE
Bump.
See Second post
PM me if interested
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Wed Feb 26, 2014 9:02 pm
by tallsam66
You still got some of these ?
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Wed Feb 26, 2014 10:28 pm
by suzolla
Hi Trevor,
Yes still got some.
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 6:36 am
by callum007
Hi Tim,
You got any Nitro gears at the moment, heard you may?
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 9:08 am
by suzolla
Got some 4.88's in a few days, what ratio are you after.
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 6:43 pm
by callum007
bloody 4.56... would need the fitting kit with flange etc too.
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 7:41 pm
by suzolla
only 4.56 i have is a Yukon Hi Pinion
Cheers
Tim
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 8:11 pm
by PigFmr
pm sent
Re: Longfield Supersets for LJ7x and KZJ7x Series
Posted: Mon Mar 10, 2014 10:19 pm
by callum007
All Good Tim, they cheap enough to bring over, you got any tg solid pinion spacer kits?