Page 1 of 1
60 series manual
Posted: Thu Aug 02, 2012 9:18 pm
by andy3542
need to pull my new front axle apart before it is 'cut and turned' and will obviously need to rebuild it when its done.
tried to download the manuals through the links on here but none of them seem to be working for me and can't seem to find anything on google.
was wondering if someone could scan the pages in a hynes manual or similar and email them to me? or if you have the pdf version already email that to me?
cheers
edit: clarifying what i meant.
Re: 60 series manual
Posted: Thu Aug 02, 2012 9:36 pm
by tomsoffroad
Its a 60, you dont need a manual.......................... you need a hammer
Re: 60 series manual
Posted: Thu Aug 02, 2012 9:49 pm
by Sadam_Husain
you shouldnt need to pull the diffhead down if thats what you mean, if you do it'll be heaps cheaper to just buy another diffhead, as far as pulling the hubs etc down and removing axles and diffhead you dont need a manual its just basic follow your nose stuff
Re: 60 series manual
Posted: Thu Aug 02, 2012 10:45 pm
by andy3542
sorry i meant the whole thing, as it needs to be a bare housing before the knuckles can be removed and rewelded. also the seals are all farked so will need to be replaced. not worried about pulling it apart pretty confident it'll be easy but i just want to make sure it all goes back together with the correct seals/gasket in place.
cheers
Re: 60 series manual
Posted: Fri Aug 03, 2012 6:36 am
by tomsoffroad
Good 'ol Google
Re: 60 series manual
Posted: Fri Aug 03, 2012 8:05 am
by kbushnz
Hey Andy I think I have a full manual on pdf. Will have a look for it later. You are more than welcome to pop around with a usb stick and grab a copy...
Its a bit big to email.....
Will PM to confirm....
Re: 60 series manual
Posted: Fri Aug 03, 2012 11:09 am
by Sadam_Husain
If Calvin hasnt got enough beer in his fridge to make a trip around there worthwhile theres a pile of online manual links on the ih8mud forum in the 70 series section, havent ever tried any of them it makes my dialup connection go funny
but there should be some there that work
http://forum.ih8mud.com/70-series-tech/
Re: 60 series manual
Posted: Fri Aug 03, 2012 2:41 pm
by kbushnz
Sadam_Husain wrote:If Calvin hasnt got enough beer in his fridge to make a trip around there worthwhile theres a pile of online manual links on the ih8mud forum in the 70 series section, havent ever tried any of them it makes my dialup connection go funny
but there should be some there that work
http://forum.ih8mud.com/70-series-tech/
Thats where I got the manual from.... Took ages to download....Even on Broad band.....
