Hilux 6 Shooter Knuckles and RHD Arms

suzolla · Post by **suzolla** » Sun Oct 14, 2012 8:59 pm

Hi,
I see these are now available, am looking at buying some, anyone else interested in a set.
See trailgear site http://www.trail-gear.com/rhd-six-shooter-knuckles
Probably be around $650 (not, see below) landed by the time you do exch rate, GST, shipping and customs charges, Cost will be a little bit less depending on how many want them.

Got some arriving in a few days, turns out they will be quite a bit cheaper than I thought above.

Will be just $500 + post for the pair of knuckles and arms.

PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Mon Oct 15, 2012 9:23 am

Bump
Cheers
Tim

rokhound · Post by **rokhound** » Mon Oct 15, 2012 11:11 am

I would have been into this Tim, but I have just had my knuckles keywayed (along with the 5th stud option). Getting the knuckles machined was only $150 cheaper than buying these arms, and that doesn't include the time I spent sorting the extra stud out etc.

suzolla · Post by **suzolla** » Thu Dec 20, 2012 9:36 pm

Bump
Updated with new cheaper price.
PM me if interested.
Cheers
Tim

Fakey · Post by **Fakey** » Thu Dec 20, 2012 10:34 pm

Am I right in thinking that the 6 shooters fit onto the 60 series knuckles? An they are supplied bare with no studs etc?

suzolla · Post by **suzolla** » Thu Dec 20, 2012 10:52 pm

Hi,
I am pretty sure they do but not 100% sure, others on here will know.
Yes not supplied with studs, just supplied with shims.
Have got some of these sets if you need Trail-Gear Super Metal Knuckle Stud Hardware Kit http://www.trail-gear.com/knuckle-studs
Each set does one complete side, $125 per set. Can just get one set if you want to use the studs and cones from your old knuckles.
Cheers
Tim

IcedJohnno · Post by **IcedJohnno** » Sat Dec 22, 2012 10:43 am

suzolla wrote:Hi,
I am pretty sure they do but not 100% sure, others on here will know.
Yes not supplied with studs, just supplied with shims.
Have got some of these sets if you need Trail-Gear Super Metal Knuckle Stud Hardware Kit http://www.trail-gear.com/knuckle-studs
Each set does one complete side, $125 per set. Can just get one set if you want to use the studs and cones from your old knuckles.
Cheers
Tim

Hey Tim
Looking at replacing the studs etc on the steering arms of my -71 Prado.
Will these parts fit my factory components?
Guess I will be looking for 12 studs etc, for the three steering arms.
What cost?
Cheers John

suzolla · Post by **suzolla** » Sat Dec 22, 2012 9:21 pm

Hi John,
If you just want studs, nuts and washers and not the collets can do for $10 each. incl post.
Cheers
Tim

suzolla · Post by **suzolla** » Fri Jan 18, 2013 4:29 pm

Bump.
See first post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Tue Jan 29, 2013 12:28 pm

Bump.
See first post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Fri Feb 08, 2013 9:36 am

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Mon Feb 25, 2013 12:23 pm

Bump.
See First post
PM me if interested
Cheers
Tim

Big · Post by **Big** » Mon Feb 25, 2013 6:16 pm

would these fit a 80 series..? as Ive been looking but seems things are a little slow for the 80..
cheers

rob-mu · Post by **rob-mu** » Mon Feb 25, 2013 6:19 pm

These will not fit 80 series or lj78/kzj78 as the swivel balls are bigger .

Big · Post by **Big** » Mon Feb 25, 2013 7:08 pm

bugger..

rob-mu · Post by **rob-mu** » Mon Feb 25, 2013 7:25 pm

Big wrote:bugger..

That's what I said when I brought a pair and tried fitting them to my Prado :lol:

tomsoffroad · Post by **tomsoffroad** » Tue Feb 26, 2013 5:49 am

rob-mu wrote:
Big wrote:bugger..

That's what I said when I brought a pair and tried fitting them to my Prado

Choice is what I said now that I own them Rob :wink:

suzolla · Post by **suzolla** » Tue Feb 26, 2013 9:23 am

Hi Tom,

I have emailed LVVTA about the various steering components regarding whether they need to be NDT 't. And if they do whether I can get them done in bulk and then supply them with paper work so you don't need to get them tested each time.
Cheers
Tim

tomsoffroad · Post by **tomsoffroad** » Tue Feb 26, 2013 11:15 am

suzolla wrote:Hi Tom,

I have emailed LVVTA about the various steering components regarding whether they need to be NDT 't. And if they do whether I can get them done in bulk and then supply them with paper work so you don't need to get them tested each time.
Cheers
Tim

That would be primo Tim. Let me know how you get on please.

Cheers Tom

suzolla · Post by **suzolla** » Wed Mar 20, 2013 12:16 pm

Bump.
See First post
PM me if interested
Cheers
Tim

Still working on getting them pre approved, will add a little bit of cost.

suzolla · Post by **suzolla** » Fri Apr 19, 2013 10:12 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Thu May 02, 2013 10:27 am

Bump.
See First post
PM me if interested
Cheers
Tim

Also Tom,
spoke to Don Hoff and sent him the info and he said that he would not require any NDT to be done on the parts.

suzolla · Post by **suzolla** » Sun May 19, 2013 2:30 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Thu Jun 13, 2013 10:25 am

Bump.
See First post
PM me if interested
Cheers
Tim

Also have been told by 2 Certifiers, Chch and Hamilton that they would not require NDT to be carried out on them for Certification.

suzolla · Post by **suzolla** » Fri Jul 05, 2013 4:42 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Mon Jul 22, 2013 4:45 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Tue Aug 13, 2013 11:13 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Tue Aug 20, 2013 10:36 pm

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Sun Sep 08, 2013 11:55 am

Bump.
See First post
PM me if interested
Cheers
Tim

suzolla · Post by **suzolla** » Mon Oct 07, 2013 9:58 pm

Bump.
See First post
PM me if interested
Cheers
Tim

Hilux 6 Shooter Knuckles and RHD Arms

Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms

Re: Hilux 6 Shooter Knuckles and RHD Arms