anyone know of cheap engine belts in CHCH

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
User avatar
albundy
Rolly Polly
Posts: 2631
Joined: Tue Sep 07, 2004 12:00 pm
Location: Lismore, NSW, Australia

anyone know of cheap engine belts in CHCH

Post by albundy »

Funny thing happened on the way home from work yesterday: snapped two engine belts, namely the waterpump and alternator belt. I've put me old spare one's on, but want to know if anyone knows of any good deals on belts in ChCh.
Al
rain, hail, sleet or snow, we go!
User avatar
billyvanboheman
Hard Yaka
Posts: 513
Joined: Wed Aug 02, 2006 12:00 pm
Location: Christchurch

Post by billyvanboheman »

I generally use Appco auto parts on Battersea Street Sydenham, I do have a contact there but don’t want to hound him with everyone looking for ultra cheap deals, they generally deal mostly with the trade guys so I'm sure if you ask for a good cash deal they will look at it.
Best idea is to have a bit of a look at a couple of places, some suppliers are cheaper on some items than others (strange setup but one may have cheaper wheel bearings for one model but really expensive cv's and vice versa).
BNT is also worth a go and there is a specialist belt place on annex road as well, have to go past on the way to work so will check the name of it as I cant remember and will post when I get to work.
Hope this helps.
1989 LWB Isuzu Bighorn, Intercooled 4JB1T, Ball Joint flip, Torsion bar wind, 3 inch stainless homebuilt snorkel,1/2 done electric fan mod,front sway bar quick disconnects, 15x8 ROH White Spokes,33x12.5x15 Hankooks.
User avatar
billyvanboheman
Hard Yaka
Posts: 513
Joined: Wed Aug 02, 2006 12:00 pm
Location: Christchurch

Post by billyvanboheman »

Had a look on the way in to work, has Dayco on the front of the building, unit1 250 Annex road Christchurch, but upon looking in the phone book at work that is not the listed company name, also SMP bearings is worth a go, both as per APPCO normally service the trade.
1989 LWB Isuzu Bighorn, Intercooled 4JB1T, Ball Joint flip, Torsion bar wind, 3 inch stainless homebuilt snorkel,1/2 done electric fan mod,front sway bar quick disconnects, 15x8 ROH White Spokes,33x12.5x15 Hankooks.
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Post by kiwipete »

Hey Al, had my alternator belt go twice on me now, strange. I got mine from parts shop (behind mobil service stn) in Stanmore road and only cost me around $13.00 each from memory. Dunno if this was good or not, but I thought it was.
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
User avatar
billyvanboheman
Hard Yaka
Posts: 513
Joined: Wed Aug 02, 2006 12:00 pm
Location: Christchurch

Post by billyvanboheman »

The place Kiwipete is talking about is Butler automart
1989 LWB Isuzu Bighorn, Intercooled 4JB1T, Ball Joint flip, Torsion bar wind, 3 inch stainless homebuilt snorkel,1/2 done electric fan mod,front sway bar quick disconnects, 15x8 ROH White Spokes,33x12.5x15 Hankooks.
User avatar
albundy
Rolly Polly
Posts: 2631
Joined: Tue Sep 07, 2004 12:00 pm
Location: Lismore, NSW, Australia

Post by albundy »

Don't find Butlers all that good, bought a CV off them a few months back, broke it that weekend, they said too bad. Last time I tried to get belts from them, they sold me the wrong size and argued with me that what they sold fitted a terrano. Bullshit. Thank for the other info, will do some ringing around later today.

Al
rain, hail, sleet or snow, we go!
User avatar
Tuxy
Winch master
Posts: 12
Joined: Tue Aug 22, 2006 12:00 pm

Post by Tuxy »

i use appco, saeco, we have a good place in town called russets they are well priced.

saeco usualy are my first port of call becouse they are a good bunch of guys down here
User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Post by mroffroader »

Tuxy wrote:i use appco, saeco, we have a good place in town called russets they are well priced.

saeco usualy are my first port of call becouse they are a good bunch of guys down here


yep saeco here in Lower hutt wellington are a good bunch of guys with really good prices...where abouts are you TUXY?
80 series tow bus towing a redneck ass vitara :D
User avatar
Tuxy
Winch master
Posts: 12
Joined: Tue Aug 22, 2006 12:00 pm

Post by Tuxy »

im in dunedin been though these forums for the last few months just been waiting for something to say :)
User avatar
kiwipete
Hard Yaka
Posts: 2328
Joined: Fri Apr 01, 2005 12:00 pm
Location: Christchurch

Post by kiwipete »

Tuxy wrote:im in dunedin been though these forums for the last few months just been waiting for something to say :)


Welcome aboard. :D
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
Post Reply

Return to “Tool Shed”