Sept 16/17

Mattman · Post by **Mattman** » Sun Sep 17, 2006 7:42 pm

Got my new sway bar disconnects in on the front, keen to see how they go. Bit of a mission getting the passenger side existing link out, had to resort to the grinder.

Replaced the wheel bearings and the brass bushings that the CV axle rides in on the drivers side. Heaps better now, the front end is a lot quieter.

Time to take it out for a play again.

Matt.

niblik · Post by **niblik** » Sun Sep 17, 2006 8:06 pm

today i got my truck body back with all the mods completed.. looks great.. :twisted:

will have to wait for pics prob to be fixed for pics to be posted.. during the week got a power done on the frame and bits.. :twisted:

wopass · Post by **wopass** » Sun Sep 17, 2006 9:01 pm

I turned 33 on saturday and worked today...... im not sure which was worse :roll:

ohh and went for a little play up thompson saturday with some dudes

Furgus · Post by **Furgus** » Sun Sep 17, 2006 9:10 pm

I spent Saturday trying to sort the brakes on the 109. New piece of bundy tube put in (a couple of weeks ago it had sprung a leak - quite amusing at the time .......... I was towing a 3000kg trailer!!!!!!!) & bled the system but still a tad spongy

. Also tried to fix the handbrake as it hasn't worked for ages ..... took it off & tried new shoes & drum from one of my spare trucks .... still no good - looks like I might have to spent some $ :cry:

Spent today sticking fence post in the ground - no post hole borer .... so good old fashiond shovel

then got the tractor stuck coming back up the track :oops:

it's still there it can wait 'til next weekend now :evil:

mudchuka · Post by **mudchuka** » Sun Sep 17, 2006 9:36 pm

wopass wrote:I turned 33 on saturday and worked today...... im not sure which was worse

i turned 32 on friday, depressing... still got pissed on sat night though.!
i have had a bad week every thing ive touched ive broken, call me sexy fingers.. broke the dvd recorder and its only 3months old, broke the sky decoder, broke a rear shock on the nissan , blew the air line for the rear locker, touched the misses lazy boy and broke the cable, drove her pajero and broke the aerial.... when i have a run of luck look out!

JTop · Post by **JTop** » Sun Sep 17, 2006 10:11 pm

Hi Furgus
Try backing off the snail cam adjusters before you bleed the brakes, this allows full return of the w/cyl to help remove air. Plus if you mix up the rear shoes you will never get a pedal as they only work one way round, o/set adj pins etc.
J Top

Furgus · Post by **Furgus** » Mon Sep 18, 2006 8:11 am

Thanks JTop - I never actually touched the rear shoes as they were fine - it was the handbrake (on the rearprop shaft) shoes I was talking about.
Furgus

WACKO · Post by **WACKO** » Mon Sep 18, 2006 5:17 pm

got my truck going again on sat then pormpty took it out. thats about all...

Shane · Post by **Shane** » Mon Sep 18, 2006 6:03 pm

Shane

Macca · Post by **Macca** » Mon Sep 18, 2006 6:07 pm

Well thanks to mike for his kind donation of his spare diff parts i got the truck going again. Just got to fill up with oil and she's all away again.

DaveM · Post by **DaveM** » Mon Sep 18, 2006 6:11 pm

Shane,
what tracks did you do?

Shane · Post by **Shane** » Mon Sep 18, 2006 6:29 pm

DaveM wrote:Shane,
what tracks did you do?

Sat were on a privite farm.

Sunday we did No name rd

shane

DaveM · Post by **DaveM** » Mon Sep 18, 2006 7:15 pm

What condition is no name rd in at the moment? I am over next weekend, and just need to know what types of vehicles could make it through without too much trouble.
How long did it take?

Cheers,
Dave

Shane · Post by **Shane** » Mon Sep 18, 2006 10:10 pm

DaveM wrote:What condition is no name rd in at the moment? I am over next weekend, and just need to know what types of vehicles could make it through without too much trouble.
How long did it take?

Cheers,
Dave

Sept 16/17

Sept 16/17

;-p

Re: ;-p