Page 1 of 1
Toyota Temp Gauge Mod
Posted: Sun Jan 27, 2013 8:50 am
by bob_or_jim
Re: Toyota Temp Gauge Mod
Posted: Sun Jan 27, 2013 9:07 am
by sig
thats good timimg .Did this mod to my 80 temp gauge a couple years ago and now i need to do my van gauge .saves me searching cheers

Re: Toyota Temp Gauge Mod
Posted: Sun Jan 27, 2013 11:51 am
by tweake
tho with a engines that are known to have overheating and head cracking issues i would throw out the stock temp gauge and go fit an aftermarket unit (i prefer digital as its easy to read exact numbers) with alarm output. that way you don't have to watch the temp gauge like a hawk.
Re: Toyota Temp Gauge Mod
Posted: Sun Jan 27, 2013 12:01 pm
by bob_or_jim
Yeah both are easy to do, Im just not a fan of extra guages when there is 1 there already. Pyro is a good addition though. Its a bit like the hondas you see getting round with the monster tach. The 1 in the dash works just as good
A warning light is a good idea though, especially if other people use your vehicle as well.
Re: Toyota Temp Gauge Mod
Posted: Mon Jan 28, 2013 11:02 am
by vvilly
did you do this to the 185?
Re: Toyota Temp Gauge Mod
Posted: Mon Jan 28, 2013 7:19 pm
by bob_or_jim
Not yet, was looking for the info to do it and thought ide post it up. Had the Prado (90 series) dash out today. Seems they work a little diff to the older dashs. With a little more playing round I should figure out how to do it though
Re: Toyota Temp Gauge Mod
Posted: Mon Jan 28, 2013 8:56 pm
by likemagic
I have done it to a 185 - works well - found the thermostat was not closing causing slow warm up that was being hidden
picture here - stolen from else where
http://www.offroadexpress.co.nz/sites/www.offroadexpress.co.nz/files/imagecache/thumb/build_photos/Temp_Gage_Before%20KZN185_0.jpg
Re: Toyota Temp Gauge Mod
Posted: Mon Jan 28, 2013 10:21 pm
by SMOKEY
bob_or_jim, I would like to do my 90# so would be interested in what, how and when, please share your findings with lots of tech to make it easy for a
OLDIE BUT GOODIE,
FITZY.
Re: Toyota Temp Gauge Mod
Posted: Mon Jan 28, 2013 11:39 pm
by bob_or_jim
No worries mate, the surf site show 1 resistor and a diode to change, well my one has 2 resistors and a diode........will chat to someone in the know and get back to ya.
Re: Toyota Temp Gauge Mod
Posted: Thu Jan 31, 2013 5:51 pm
by imsohi
good info to have cheers