Offroad-Express

Hello All
I have a 1993 KZJ71 Prado sx and in the process of ordering diff locks but have been asked what diffs are in my truck. My research shows 8inch 10 bolt full floating in the front and a 8inch 12 bolt full floating 50mm bearing in the rear. is this correct?? any help would be great thanks

Here is some more info for you.

Front diff is a high pinion reverse cut 8"
http://www.toyodiy.com/parts/p_J_1993_T ... 301.3.html

Rear diff is commly called a V6 / Turbo 8" diff
http://www.toyodiy.com/parts/p_J_1993_T ... 101.8.html

http://www.gearinstalls.com/bearing.htm

http://home.4x4wire.com/erik/diffs/

Hi,
What sort of diff locks are you looking at buying, auto lockers or air lockers, may be able to help.
Cheers
Tim

locker

suzolla wrote:Hi,
What sort of diff locks are you looking at buying, auto lockers or air lockers, may be able to help.
Cheers
Tim

Hi Tim
im looking at doing air lockers
cheers glen

Hi Glen,
Have you seen http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=64&t=33713
or
http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=64&t=32833&p=355958#p355958

Also a bit surprised your info is that the front is 10 bolt and rear is 12 bolt, because as far as i know the ARB RD132 fits the 8" high pinion and the 8" V6 and the 8" 4 cyl diffs.

Cheers
Tim

RD132 does fit both. The centres are identical.