Page 1 of 1
Wanted.
Posted: Wed Aug 28, 2013 8:53 pm
by crzyfl
Anyone got a spare diff oil seal, also looking for outer cv circlip. I have heard that some people prefer not to use them to make cvs easier to remove?
Re: Wanted.
Posted: Thu Aug 29, 2013 11:17 am
by Tarmac
Like the seal by your wheel bearing? That and the circlip should be just under $10 total new
Re: Wanted.
Posted: Thu Aug 29, 2013 12:30 pm
by churchill
The seals are under $20 from suzuki and the circlips are a couple of dollars from an auto shop.
If it's your right hand side front cv, have a read of this!
http://www.suzuki-forums.com/1g-1999-2005-vitara-grand-vitara/37371-front-dif-loose-drive-shaft.htmlThe fix works well. Nylon bush is around $120 from Suzuki in NZ.
Re: Wanted.
Posted: Thu Aug 29, 2013 7:28 pm
by crzyfl
Thanks. I've got one of those and putting it in. It's my first destroyed cv, but I'm not surprised since the vehicle was about to roll and perched on that wheel plus the diff was locked. After experiencing it, I'm definitely doing the stub axle mod next time.

Re: Wanted.
Posted: Fri Aug 30, 2013 2:29 pm
by Tarmac
http://www.auszookers.com/forum/viewtop ... =17&t=6953 hopefully that will take you straight there but its in their gd tec / bulletproof diff stuff seems someone over there has started making a bush for around $90. Hopefully no ones upset about another forum link
Re: Wanted.
Posted: Mon Sep 02, 2013 8:37 pm
by churchill
OEM ones look much better quality than the cast urethane ones and worth the $20 difference in my opinion.
No worries about the info, hope it helps.
Re: Wanted.
Posted: Mon Sep 02, 2013 10:20 pm
by crzyfl
Thanks guys.