Offroad-Express

Hey guys

Heres my question.

Is the Swb rear pan hard rod the same as the lwb

Mates got a SWB saf y60 problem is the pan hard rod is bent, Have straightened it but its not perfect but has a LWB for parts with a good rod so wondering if they are the same and we could just swap them over.

otherwise will have to rig something up as were entered into manukau winch comp.

Weld 50x50x3-5mm angle to it as a strong back. Problem is then, rather than bend panhard something else will
One would think they are the same. Could always put them side by side to check

Cheers,

yes there's an idea only problem is getting the one off the LWB as one nut is @#$*ed. oh well one can only try I guess just stabbing in the dark you never know who you'll hit with some information.

Split the nut
If you want to preserve the threads, cut with grinder nearly through and then hit with a cold chisel (controlled destruction).

Cheers,

Panhards the same SWB/LWB