Page 1 of 1

rear springs

Posted: Sun Oct 29, 2006 4:04 pm
by pajeroboy
does anyone no what the ARB or EFS rear springs fitted into a 01 swb soft top pajero are like?looking at getting new springs,have hurd that they can make the ride very hard,what would be better to have a fixed spring rate or progessive rate?

Posted: Sun Oct 29, 2006 7:29 pm
by NJV6
HI, it depends weather you want to lift it or make it handle a load better. To just lift it i'd try adn get some same diameter (rate) coils but longer. To lift it by putting heavy duty springs in will often result in a firmer ride.
I have never tried progressives in a Paj - Worked quite well in the old Rangie but they always ride nice 8)

Posted: Sun Oct 29, 2006 11:13 pm
by WACKO
01 jtop? if thats the right year, get us some pics! did you mean 91? i have a 93 jtop and i put raised lwb king springs in it. lifted it nicely and i dont find the ride to harsh either. if it makes a differance to you, i have the adjustable shocks and ride height in mine, so its in hard on the road and soft offroad.

Posted: Mon Oct 30, 2006 4:45 am
by SMOKEY
Give Murray a ring he's the Pajero guru in Christchurch, has all the bits and pieces you need.3474901 or0272517055.
FITZY.

Posted: Mon Oct 30, 2006 9:29 am
by 4WDbits
Springs are designed for a certain amount of load, hard springs for more load. Choose the coils that best match what you use the vehicle for. A quick comparison can be done between current coils and new aftermarket ones using the number of coils and wire size. Smaller the wire diameter and more coils makes for a softer coil.
The specs for Pajero EFS coils can be found at http://www.4wdbits.co.nz/ProductsListPrice.aspx?CategoryID=45

Posted: Wed Nov 01, 2006 8:40 pm
by pajeroboy
hey thanks for the help,ohh and yeah it is a 91 not 01 my bad