Page 1 of 1

1988 Mitsubishi Delica/L300 4WD van - creaks when turning

Posted: Thu Jan 16, 2014 3:41 pm
by rok-the-boat
When I turn left, sometimes, maybe 50% of the time, once past half lock I sometimes get a creaking sound, or one large creak/knock.

Went to get it tested at a local suspension shop - it is the three front diff mounts - all loose. What would cause that I wonder? The control arm bushes are all fine. Maybe the previous owner ran it in 4WD?

The price of the parts in NZ is crazy. I am looking at a place called Milners in the UK. It will probably be cheaper with postage.

Also - has anyone done this job? I have a Pajero manual and it looks kind of similar. The shop wants like, $700 to change the bushes. Crazy! And also, I wonder if there are replacement bushes that came in halves - easier to fit etc.

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Posted: Thu Jan 16, 2014 4:45 pm
by cornflake
go to a place called the mount shop should be able to get them cheap i got hole lot of stuff there cheap

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Posted: Thu Jan 16, 2014 5:05 pm
by rok-the-boat
Hey thanks - haven't seen that place before.

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Posted: Mon Jan 27, 2014 11:25 am
by rok-the-boat
Looks like a place in the UK is going to work. Milners. The mount shop didn't have them. A quick question - if the diff mounts are worn a bit, I am guessing it is not unsafe to drive if I don't use 4WD. I mean, without 4WD there are not too many forces acting on the front drive mechanism - am I right? It will take a few weeks before the parts arrive ...