Page 1 of 1
Manual hubs
Posted: Thu Feb 06, 2014 4:31 pm
by crzyfl
Got an older vit with 22 spline cvs. Question. Do these have 26 spline outer ends? Wanting to buy some manual hubs.
Re: Manual hubs
Posted: Mon Feb 10, 2014 11:37 am
by 1kz_surf
So what's the wuestion dosent make sence lol
Re: Manual hubs
Posted: Mon Feb 10, 2014 7:01 pm
by crzyfl
Inside splined end can be 22 or 26 spline. I have heard that all of the outside (hub) ends are 26. Just wanting some confirmation.
Re: Manual hubs
Posted: Tue Feb 18, 2014 5:30 pm
by crzyfl
What is the best place to buy a good set of manuals? Looking at getting them from low range in the us. $200 us including shipping on a set of superwinch ones.
Re: Manual hubs
Posted: Tue Feb 18, 2014 5:34 pm
by Weemsy
Try 4wdbits.co.nz or bits4vitz.co.uk
Re: Manual hubs
Posted: Tue Feb 18, 2014 7:34 pm
by crzyfl
NZD delivered,
Low range off road superwinch $240
Low range off road warn premium $280
4wdbits AVM 400 series $356
Bits4vits unknown brand $200
Re: Manual hubs
Posted: Tue Feb 18, 2014 7:46 pm
by 1kz_surf
on mine ive used old sj413 hubs as they are all the same and you can prob pick some up cheaper
Re: Manual hubs
Posted: Wed Feb 19, 2014 8:09 pm
by churchill
Try to get the Aisin ones, they have the locking cones around the drive bolts. My Warn hubs didn't have that feature so I had to retighten the hubs every couple of outings and I could hear them creaking when I changed direction. Mind you I did have a front locker...