Offroad-Express

Hey all,

Been searching for a while and having a shocker,can't find a fault code list for a knzn185. Does anybody have one or know where I can find one ?

Thanks in advance

Running the 1KZTE?
If yes read on.
Codes and what sensor/circuit it relates too:

1KZ-TE diagnostic codes:

12 = No RPM signal during cranking.
13 = No RPM signal after cranking and engine reaches 680rpm+
14 = Timing control signal (crankshaft angle 7 deg or more out from target)
15 = Throttle control motor (no signal)
16 = Auto trans control signal
18 = Spill control valve (no signal)
19 = Accel pedal position sensor (no signal)
22 = Coolant temp sensor
24 = Intake air temp sensor.
32 = Correction resistor signal.
33 = Intake constrictor control signal.
35 = Boost pressure sensor.
39 = Fuel temp sensor.
41 = Throttle position sensor.
42 = Vehicle speed sensor.
43 = Starter signal to ECU.
51 = Switch control system
96 = EGR valve lift sensor.
99 = Engine immobilizer.

That's the one, thanks for fast reply