Offroad-Express

http://www.trademe.co.nz/Trade-Me-Motors/Specialist-cars/Competition-cars/auction-77285974.htm

1984 SJ 410 Suzuki...

Toyota 4.0ltr Lexus quad cam V8 run by a link computer.
Hilux gearbox and running gear.
Hydraulic four wheel steering.
Torsion bar suspension with silvery shocks and ajustable air rams.
Generals 35x15 tyres on 5 beadlock rims.
Been a great competion truck for the last 10yrs.
Heaps of spares if needed.
Tandem trailer 11x6 also available.
Will be at the next SOUTH WAIKATO RALLY on the 26.11.06 at KARAPIRO SH1.

yea i saw that.........if only ......id be very

have seen that truck in action many times, that thing is freeking awesum !!!!

i think that is kevin mcgoverns machine

he is a car dealer in tokoroa

http://www.trademe.co.nz/a.asp?id=77925240

Been out with this one a couple of times. Very very capable truck.

1996 coil sprung Suzuki samurai
1995 body with 96 front guards, no rust
31x 10.5 r 15 simex extreme trekkers x 5
4 mechanical beadlocked rims
1600cc fuel injected vitara motor, 8 valve, throttle body injection
5 sp manual
rock lobster crawler transfer box
roll bar and cargo barrier
100mm lift with koni front shocks and adjustable rears
dual batteries
8000lb electric winch
Ez-locker rear diff lock
Front and rear tow hooks
Not road legal nor will it ever be
very capable club truck
vehicle can be viewed in takanini, auckland
does not come with the radios or aerials
various spares go with it
a few dings and scratches (lots!)

I like this one

Tipper




great for fixing up those tracks

BrentC wrote:I like this one

Tipper


great for fixing up those tracks

2WD/4WD options

Diff lock

Axle Lock

Haha wonder how something like that'd do in competitions, remove rear tray, like some 31's may be bit front/top heavy though, but would be real light...

http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Other-accessories/auction-77872562.htm

hydrulic suspenion kit

12 volt two motor & pump set up with 4 rams & spring set up out of a vitara all working but two hoses will need repair (weeping) comes with 3 large auto batteries

hahaha you bet me to it, i saw it to lol

Forgive my ingorance

How does the hydrulic suspenion work ??

not exactely sure how it works but this is what it can do

http://funhight.blogspot.com/2006/09/you-can-do-this-with-your-hydraulic.html







Basically i think you can just control height of each corner separately using hydraulic rams etc...

hey, they've got more articulation than mroffroader

and then there's these guys....
http://www.youtube.com/watch?v=cXoqCOLp4ow
who needs ground clearance anyway

Haha OOPS
http://www.youtube.com/watch?v=G3BdJjnbhF0

Here's an idea though... fit some hydraulic rams to roof of a rollcage so you could just roll yourself backover again

that idea had been suggested due to amount of time i spend on my side...

heres another interesting item on TM

http://www.trademe.co.nz/a.asp?id=78012667

brianr70 wrote:heres another interesting item on TM

http://www.trademe.co.nz/a.asp?id=78012667

far man that is wicked, a bit austrailian but it wicked

These Would be perfect to put your zook on:
http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Parts-Other-makes/Engines-drive-trains/auction-77694008.htm
Monster Truck diffs





Then the tyres are avaliable also:
http://www.trademe.co.nz/Business-farming-industry/Farming/Tractors/auction-62023785.htm
4 Goodyear TerraTyre tyres and rims ex JCB Fastrac. 54x31-26 10 ply rating.Very little wear on the rubber. These can be run safely down to 5 psi if required. Would suit a "Monster Truck" application.





Then fit it with the hydraulic suspension

icekayak wrote:These Would be perfect to put your zook on:
http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/Parts-Other-makes/Engines-drive-trains/auction-77694008.htm
Monster Truck diffs





Then the tyres are avaliable also:
http://www.trademe.co.nz/Business-farming-industry/Farming/Tractors/auction-62023785.htm
4 Goodyear TerraTyre tyres and rims ex JCB Fastrac. 54x31-26 10 ply rating.Very little wear on the rubber. These can be run safely down to 5 psi if required. Would suit a "Monster Truck" application.





Then fit it with the hydraulic suspension

now thats some food for thought!!!!! i think i would do that with couston chassie and a 454 big block v8 then put the vitara body on top