Page 1 of 1

1kzte trans cooler

Posted: Sun Apr 06, 2014 8:00 am
by mike.308
Have got a cooler to put in and am just wondering what line is the feed line to the factory one? The one on the left when looking from frount of truck or the right, just want to make sure i put it in before it goes threw radiator cooler

Re: 1kzte trans cooler

Posted: Sun Apr 06, 2014 8:16 am
by hachi_roku
its messey, but just run both lines into buckets and start it.. that'll show ya which is the feed

Re: 1kzte trans cooler

Posted: Sun Apr 06, 2014 8:24 am
by klompy
^^^^ Thats how I do it as well.

Re: 1kzte trans cooler

Posted: Sun Apr 06, 2014 8:58 am
by jonossiksilvia
From memory the front outlet from the trans is fluid out

Re: 1kzte trans cooler

Posted: Mon Apr 07, 2014 7:20 am
by _LowKey_
i done some research into this as ive just installed trans cooler, the front (higher pipe) with the sensor plug on the trans seemed to be the out, and the back (lower pipe) seemed to be the return, ive hooked mine up this way and all is working fine.