Page 1 of 1
anyone interested in 413 fiberglass parts?
Posted: Tue Nov 28, 2006 8:31 pm
by icekayak
Just testing the waters at this stage but is anyone interested in soft top fiberglass 413 parts?
No idea on prices, but all body parts could be available. eg bonnet, windscreen surrounds etc..
Cheers
Chris
Posted: Wed Nov 29, 2006 7:24 pm
by redzuki
i might be interested in a bonnet depends on how much it weights and how much it costs.
Posted: Wed Nov 29, 2006 9:17 pm
by lilpigzuk
Same Chris. Assuming you are buying the moulds off who ever is with fraser cars you may have too charge alot to get you money back though. Thats why the guy is selling up in hamilton. $3k for a bare 413 truck cab. Alot of money for someone on a budget (as most zuk owners are)
Posted: Wed Nov 29, 2006 9:22 pm
by icekayak
yeh was gonna do a little investigation about what it costs to get them made from moulds..
Posted: Thu Nov 30, 2006 7:52 am
by gomulletgo
How does fiberglass handle rockchips? think lil pig on the redline, flingin stones like buckshot.
MULLET
Posted: Mon May 21, 2007 5:48 pm
by greg29
might be in 4 a bonnet
Posted: Mon May 21, 2007 6:46 pm
by Ryan
i know this is an old thread but since someone else has brought it
back from the dead.... anyone know of any fiberglass doors???
Posted: Mon May 21, 2007 6:47 pm
by mroffroader
Ryan wrote:i know this is an old thread but since someone else has brought it
back from the dead.... anyone know of any fiberglass doors???
what you want them for? cut yours in half and have half doors
Posted: Mon May 21, 2007 6:49 pm
by Ryan
thanks but i suggest you stick to the disco my freind!!
Posted: Mon May 21, 2007 6:51 pm
by mroffroader
Posted: Mon May 21, 2007 7:53 pm
by lilpigzuk
were some on TM a while back, think he was wanting bout $200 for the pair. Could try 4wdfiberglass.com and see if they have anything left. I would just go plywood though, cheap as, easily replaced, Look mint
Posted: Mon May 21, 2007 8:01 pm
by Ryan
lilpigzuk wrote:were some on TM a while back, think he was wanting bout $200 for the pair. Could try 4wdfiberglass.com and see if they have anything left. I would just go plywood though, cheap as, easily replaced, Look mint
not a good look for the wof man tho....
Posted: Mon May 21, 2007 8:33 pm
by mroffroader
Ryan wrote:lilpigzuk wrote:were some on TM a while back, think he was wanting bout $200 for the pair. Could try 4wdfiberglass.com and see if they have anything left. I would just go plywood though, cheap as, easily replaced, Look mint
not a good look for the wof man tho....
you don't even need doors for a wof i dont think
