Offroad-Express

after a age , I finally found time and reasonable weather to started adding a top bar to the front of the safari which will connect to a bush bar down to the sliders,
wasted over a metre of pipe getting heights and lengths. right,
it's a basard when you see there's another way after you cut pipe

Bit more work on my son's truck, trayback welded into place. Now have to get the radiator sorted and plumbed up.

still working on the garage. built a new workbench. just lining the last wall today. hope to have it all done tomorrow and get to use the garage again.
got plenty of projects lined up to do

Made a new dash and mounted all new gauges and rear view camera ( yep that's rite fokes it's wood grain basically a bently ) new spottys on the front and Craig Davies water pump and controller should take care of the over heating hopefully

finally managed to get some time and start work on the 40 .spent hours plasma ,gas cutting and grinding off old brackets and spring mounts.managed to scrounge up a factory crossmember plus mounts etc and got that in and welded.big ups to philly b who came out and gave me some help and direction ,amazing what can be achieved with a second set of eyes ( and some green bottles). .got the lower rear arms tacked to the new diff housing .need to get to howies and borrow an 18x1.5 tap for the chassis end.will take me a while but already looking forward to having it mobile again

Installed a brand new alloy radiator. perfect, lean fit.

Did a camping trip over on the wild west coast, pics here:http://www.offroadexpress.kiwi/Forums/viewtopic.php?f=8&t=42159