Page 1 of 1
Seized T20 Prado Wheel Bearing Locking Ring Screws
Posted: Sat Sep 27, 2014 12:42 pm
by Jerry
If anyone is pulling off their hubs I recommend replacing these pesky screws with NEW ones
One came off ok the other 2 seem to be made of cheese
I'm guessing the only option to get these off now is to drill them out
Toyota P/N is 90149-50055
Re: Seized T20 Prado Wheel Bearing Locking Ring Screws
Posted: Sat Sep 27, 2014 1:02 pm
by derk
did you use the correct size torx bit or jam a screwdriver into them
Re: Seized T20 Prado Wheel Bearing Locking Ring Screws
Posted: Sat Sep 27, 2014 1:07 pm
by Jerry
This was with the torx bit
Re: Seized T20 Prado Wheel Bearing Locking Ring Screws
Posted: Sat Sep 27, 2014 1:19 pm
by kbushnz
I replaced mine with cross head style screws instead of the torq ones....
Re: Seized T20 Prado Wheel Bearing Locking Ring Screws
Posted: Sat Sep 27, 2014 2:09 pm
by oldblue
Bit late now, You should punch the head of the screw with a flat faced punch before unscrewing them and replace with CSK Allan machine screws.