Offroad-Express

Has anyone used one of these turbo kits before?
https://touch.trademe.co.nz/listing/view/862923513

Not wanting to run large boost say 10 to 12 psi at most

Will eventually get boost compensator and a better turbo down the track
But just want a bit more drive ability for the mean time
Cheers
Alex

similar. to the one I put on mine go with interal waste gated turbo, there's a lot not in that kit the joiners to the manifold crossover pipe hose clamps oil feed line , oil feed block , you'll need to have oil return to the sump.
there is a lot to do to fit a turbo, with working 8 hour days near three months over winter to fit mine

coxsy wrote:similar. to the one I put on mine go with interal waste gated turbo, there's a lot not in that kit the joiners to the manifold crossover pipe hose clamps oil feed line , oil feed block , you'll need to have oil return to the sump.
there is a lot to do to fit a turbo, with working 8 hour days near three months over winter to fit mine

Cheers Coxs
Will keep looking for something a bit better


Has anyone made a j pipe adapter to use standard exhaust manifold?

a couple of guys on here have done them , there is nothing wrong with that kit, apart from bits not there it's a starter kit, if you are in no rush to fit it ,buy the other bits over time, then one big bolt up session

Cheers will see how things go

Turbo can wait till after 2" lift, big guard chop and 35s