Runva 9500 evo drawing/parts help

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
Weeds
Hard Yaka
Posts: 108
Joined: Fri Sep 20, 2013 8:18 pm
Location: Whitemans Valley UH

Runva 9500 evo drawing/parts help

Post by Weeds »

Saterday night few beers few mates and a play round and around in the paddocks in the buggie normaly good fun except for having removed the gear box off the winch for remote free spool to be fitted had cable tied the drum in place but thay broke at some stage and the drum slid off need to order few bits that sat between the moters shaft and the gear box problem been I don't know what thay where any one have a drawing or pulled on a part can tell me what was in there. Trip planed for next weekend so pretty keen to get it going again any help would be greatly received have look over the net couldn't find anything.

Thanks
Weeds
Big
Hard Yaka
Posts: 2134
Joined: Thu Nov 03, 2005 12:00 pm
Location: central Otago
Contact:

Re: Runva 9500 evo drawing/parts help

Post by Big »

give these guys an email or ring them if you can get there number

winch.co.nz as it's their product from memory.. at least they can get the parts or should be able to
Post Reply

Return to “Tool Shed”