Pajero lockers

Selling, info, or parts wanted. Anything about parts goes in here.
Post Reply
User avatar
Team Tonka
Hard Yaka
Posts: 125
Joined: Tue Jan 21, 2014 5:39 pm
Location: Rangiora

Pajero lockers

Post by Team Tonka »

Truck is going to fund buggy build so having a clear out of Pajero stuff.

ARB front locker inc diff with 4.8 ratio. Have switch and valve but no compressor - $850
Factory Mitsi rear air locker - 9" in, 4.8 ratio, good order, can have complete axle, but half shafts have twisted ends - $600
Factory Mitsi rear locker - 9", 4.8 ratio, bare diff, needs new pinion bearings but locker good - $500
Factory Mitsi rear locker - 9.5", 4.9 ratio but have 4.6 crown wheel and pinion somewhere if wanted. Mechanically good but has air leak on locker. Think it needs a new diaphragm. Bare diff but was building it into a modified 3.5 litre axle for buggy using 2 long drive shafts. Can have that axle case with it if wanted. Would build a Safari strength axle. These lockers for the 3.5 and 2.8 diesel are as rare as hens teeth so want $850 for it.

Have one compressor for factory diff which can go with first one sold.

Cheers Andy.
May the force be with you.
User avatar
Team Tonka
Hard Yaka
Posts: 125
Joined: Tue Jan 21, 2014 5:39 pm
Location: Rangiora

Re: Pajero lockers

Post by Team Tonka »

ARB locker sold, starting on new build this week so would be nice to see other stuff gone. Feel free to make a reasonable offer on other lockers. Cheers Andy.
May the force be with you.
Post Reply

Return to “4WD Parts”