Page 1 of 1
WD21 front diff mount bushes
Posted: Thu Sep 10, 2015 5:03 pm
by johnny262
Any chance someone's got some measurements for the above bushes - r180a
Trying to source some eccentric bushes to drop the front diff
Cheers
Re: WD21 front diff mount bushes
Posted: Thu Sep 10, 2015 6:28 pm
by BlakeNZ
Re: WD21 front diff mount bushes
Posted: Thu Sep 10, 2015 7:41 pm
by stovanovich
Only problem there is the excessive shipping cost, I've been looking to this myself so I can swap my r180 for an r200
Re: WD21 front diff mount bushes
Posted: Thu Sep 10, 2015 8:49 pm
by Crash bandicoot
i just measured the clearances between the drive shaft flanges and the torsion rods then unbolted the two mounts and cut out about 20mm and welded them back together.
Re: WD21 front diff mount bushes
Posted: Tue Sep 15, 2015 5:57 pm
by johnny262
Cheers mate, couldnt find the link for some dyslexic reason. Bit the bullet and forked out $160 they're on their way now