Offroad-Express

Will a ln61 4x4 gearbox from a 2lt fit a ln106 with a 2.8?

Cheers guys

It will bolt to your motor and should take your drive shafts, gear levers are in a slightly different location and you may need to grind/cut the tunnel a bit to get the levers to work. Yours has a G52 in it I believe.

Thanks, So with a bench seat it may not work depending which way they levers are more forward?

Gear levers on the Surf box sit further back. If you google the boxes you will see the difference.
W56 is the Surf
G52 is the Hilux

Thanks mate