Offroad-Express

Does anybody know how to and have a list of the fault codes for the auto trans in a kzj71?

The auto in those are the a340 variant boxes. Do a google search on A340E fault codes and you will find plenty of info .

Ive found what the fault codes refer to but how do I get the fault codes to show up? At the moment I have a blinking OD light.
Also on the rear of the Auto trans drivers side is a black plug/sensor which is fairly loose, next to it is a bracket. Is the tag of that bracket supposed to sit over the sensor to hold it in place? Hard to explain but I might try taking a photo next time I see my truck. I hoping this is whats causing my fault but cant seem to get it to sit tight.

Thanks
Nick

Is the speedo still working ?

Yep speedo still works. Everything except the flashing overdrive light seems to work and drive as it should

have a read thru this and look at the pics.
Its for an 80 but its the same for the other toyota's...
The early toyota's use OBD1 diagnostics...

For future reference and anybody else that may have similar problems to myself, to get the auto trans fault codes to display on a KZJ71 the two connectors to short out are TE1 and E1 in the diagnostics port. Different models seem to have different combinations