Tranfer lever mods when body lifting?
Posted: Tue Feb 06, 2007 10:23 am
I have a 91 shorty that I have body lifted to 45mm above normal.
I then found it won't go into 2wd. After taking the plastic console off around the gear levers I found the transfer lever fouling on the body slightly so I have managed to fix that but now I find that the plastic console fouls it.
So the question is how to fix this problem, I have noticed that the levers them selves flair out to about 25-30mm diameter looking like they have a rubber insert or something inside to cushion shifting. Can this lever can be taken off the lever that is attached to the box itself.I figured I could replace the fat boy lever with a thinner one so as not to foul console.
Any help on how others have solved this problem greatly appreciated.
Cheers John
I then found it won't go into 2wd. After taking the plastic console off around the gear levers I found the transfer lever fouling on the body slightly so I have managed to fix that but now I find that the plastic console fouls it.
So the question is how to fix this problem, I have noticed that the levers them selves flair out to about 25-30mm diameter looking like they have a rubber insert or something inside to cushion shifting. Can this lever can be taken off the lever that is attached to the box itself.I figured I could replace the fat boy lever with a thinner one so as not to foul console.
Any help on how others have solved this problem greatly appreciated.
Cheers John