well i've been given the green light

New to the site? Introduce yourself, tell us what 4wd(s) you have or your new to 4wding. Ask questions look for tips and hints in here.
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

well i've been given the green light

Post by wgtnnewbie »

from the treasury department i mean missus to actually start saving to get myself a 4x4 so my question is how much would be a good budget to save for and what should i consider as a 1st toy. 8) 8)
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Post by Sadam_Husain »

CRUISER :wink:
User avatar
mike
Last minute Mike
Posts: 3545
Joined: Fri Dec 06, 2002 12:00 pm
Location: Christchurch - The place I'd like to be

Post by mike »

LR :twisted:
1973 SWB Land Rover V8 Hybrid
1994 Toyota Surf
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

newbie

Post by coxsy »

ataboy off to a good start, this can be expensive hobby,you can get a good cruiser or safari for around $5000, or a less costly gig is a suzuki vitara , smaller tyres, smaller engine ect
others will add their openion in time
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

Sadam_Husain wrote:CRUISER :wink:


x 2........ Image
ImageImage
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

see

Post by coxsy »

see in no time at all
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

niblik wrote:
Sadam_Husain wrote:CRUISER :wink:


x 2........ Image


x100 :thumright: :D :thumleft:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Post by wgtnnewbie »

niblik wrote:
Sadam_Husain wrote:
CRUISER (and what type of cruiser(need i really ask)).


x 2........


x100
wondered how long it would take for the cruiser brigade to turn up....lol it will take a while to save the cash tho, will end up selling my car to help fund it at a later stage as well.
what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

wgtnnewbie wrote:
niblik wrote:
Sadam_Husain wrote:
CRUISER (and what type of cruiser(need i really ask)).


x 2........


x100
wondered how long it would take for the cruiser brigade to turn up....lol it will take a while to save the cash tho, will end up selling my car to help fund it at a later stage as well.
what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....


sell the car now. 4wd is the only way to go.
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Post by wgtnnewbie »

skid wrote:
wgtnnewbie wrote:
niblik wrote:
Sadam_Husain wrote:
CRUISER (and what type of cruiser(need i really ask)).


x 2........


x100
wondered how long it would take for the cruiser brigade to turn up....lol it will take a while to save the cash tho, will end up selling my car to help fund it at a later stage as well.
what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....


sell the car now. 4wd is the only way to go.
i would but having to startt a new job on the 2nd i'll need it for a little while longer and it was kinda the condition that i had to save most of the money before selling it....typical woman.
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Post by Sadam_Husain »

wgtnnewbie wrote:what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....


theres been a few previous threads on this discussion that are worth searching back for
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

wgtnnewbie wrote:
skid wrote:
wgtnnewbie wrote:
niblik wrote:
Sadam_Husain wrote:
CRUISER (and what type of cruiser(need i really ask)).


x 2........


x100
wondered how long it would take for the cruiser brigade to turn up....lol it will take a while to save the cash tho, will end up selling my car to help fund it at a later stage as well.
what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....




sell the car now. 4wd is the only way to go.
i would but having to startt a new job on the 2nd i'll need it for a little while longer and it was kinda the condition that i had to save most of the money before selling it....typical woman.


hahahahahaha, its funny you should mention woman. I've just been posting on another thread about what a strange breed they are. :lol: :lol:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Post by turoa »

uggh, id say buy some basic and easy to fix, thats cheap as a first 4wd.

I bought a landrover with a holden 186. Was cool fun. $450 and went well. Only thing id reccomend doing is putting a LWB salisbury rear in. Means you wont break stuff. The next thing after that is tyres ($700 second hand) and then maybe injection for the motor (I have a kit forsale, the only thing missing is the fuel pump). Then you will have a kickass rig for learning to drive well offroad. Not many people realise how hard it is to drive one of these things well.

I liked my landrover too much to sell and get something bigger, so I started my toyota diff conversion on cart springs.......... You wont need to do that with a salisbury rear. Now, I keep wishing that I had just put the salisbury rear in.

So for about $1500, you could have a rig that goes well offroad, that you dont mind bashing up, and is cool. If you need more information, PM me, since you are in welly, I can help you out with the mods as they are reasonably easy to do once you know what you are doing.

P.s, the injected 202 in mine sounded cool, revved really well, and went further than Mikes surf with twin lockers (he has a dent in his rear bumper to show for that).

the only thing I was unhappy with was the rear axle. I SHOULD have just salisbury'ed it. But im a retard :wink:
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

turoa wrote:uggh, id say buy some basic and easy to fix, thats cheap as a first 4wd.

I bought a landrover with a holden 186. Was cool fun. $450 and went well. Only thing id reccomend doing is putting a LWB salisbury rear in. Means you wont break stuff. The next thing after that is tyres ($700 second hand) and then maybe injection for the motor (I have a kit forsale, the only thing missing is the fuel pump). Then you will have a kickass rig for learning to drive well offroad. Not many people realise how hard it is to drive one of these things well.

I liked my landrover too much to sell and get something bigger, so I started my toyota diff conversion on cart springs.......... You wont need to do that with a salisbury rear. Now, I keep wishing that I had just put the salisbury rear in.

So for about $1500, you could have a rig that goes well offroad, that you dont mind bashing up, and is cool. If you need more information, PM me, since you are in welly, I can help you out with the mods as they are reasonably easy to do once you know what you are doing.

P.s, the injected 202 in mine sounded cool, revved really well, and went further than Mikes surf with twin lockers (he has a dent in his rear bumper to show for that).

the only thing I was unhappy with was the rear axle. I SHOULD have just salisbury'ed it. But im a retard :wink:


turoa just told everyone that you should buy a cruiser. you don't have to worry about breaking anything then. he did a good job of telling you to keep away from lorrys
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
xj
Hard Yaka
Posts: 2296
Joined: Sun Jun 25, 2006 12:00 pm
Location: Hamilton

Post by xj »

Of course I would have to chime in with JEEP.... but i dont want ya throwing urself off a balcony just yet....
/| , [____],
l----L -OlllllllO-

()_) ()_)-----)_)
KEEP'N JEEP'N!
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

ok.... 2 cent rambles .........

cruiser - cheapish for older models but heavy and can suffer from rust, strong as an ox and go forever.

surf - cheap and lightish, medium long wheelbase with 'family carryin' possibilities..

safari - coiled, bit more costly but comfy, heavy but strong too.

suzuki - cheap and light, go most anywhere..

ladas - cheap and very good 'bang for buck'..

heaps more info to find in previous threads..

search the net too.. you can find info to support any arguement.. so it really comes down to personnal peference..

happy shoppin!!!!!!! Image
ImageImage
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Post by turoa »

skid wrote:
turoa wrote:uggh, id say buy some basic and easy to fix, thats cheap as a first 4wd.

I bought a landrover with a holden 186. Was cool fun. $450 and went well. Only thing id reccomend doing is putting a LWB salisbury rear in. Means you wont break stuff. The next thing after that is tyres ($700 second hand) and then maybe injection for the motor (I have a kit forsale, the only thing missing is the fuel pump). Then you will have a kickass rig for learning to drive well offroad. Not many people realise how hard it is to drive one of these things well.

I liked my landrover too much to sell and get something bigger, so I started my toyota diff conversion on cart springs.......... You wont need to do that with a salisbury rear. Now, I keep wishing that I had just put the salisbury rear in.

So for about $1500, you could have a rig that goes well offroad, that you dont mind bashing up, and is cool. If you need more information, PM me, since you are in welly, I can help you out with the mods as they are reasonably easy to do once you know what you are doing.

P.s, the injected 202 in mine sounded cool, revved really well, and went further than Mikes surf with twin lockers (he has a dent in his rear bumper to show for that).

the only thing I was unhappy with was the rear axle. I SHOULD have just salisbury'ed it. But im a retard :wink:


turoa just told everyone that you should buy a cruiser. you don't have to worry about breaking anything then. he did a good job of telling you to keep away from lorrys


Yea, 40 series cruisers ar egood for leaning too, but you will struggle to find a good one with little rust and road legale for under $2000. And they are hard to panelbeat. I really like the ol 40's but I think a land rover or a suzuki will be better suited to somone new to 4wheelings needs
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

xj wrote:Of course I would have to chime in with JEEP.... but i dont want ya throwing urself off a balcony just yet....


hes from welly, where they have lots of sand around the south coast where hes gonna go lots. is a jeep such a good idea :lol: :lol:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Post by wgtnnewbie »

Sadam_Husain wrote:
wgtnnewbie wrote:what are the various pros and cons for each vehicle and be honest now i've got a lot of time to make up my mind....


theres been a few previous threads on this discussion that are worth searching back for
i'll make sure to look through those threads
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

turoa wrote:Yea, 40 series cruisers ar egood for leaning too


bwahahaha........ 'cruiser lean'....

that comes from factory.... Image :lol:
ImageImage
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Post by wgtnnewbie »

funny cruisers seem to come up a lot....lol there's a 40 series just over the cul de sac from me with a V8 in it (can tell from the mighty roar as it leaves) plus one of the tutors at weltec has a pair, one chev powered ( his road legal rig) and the other ford powered which is his comp truck tho he hasn't competed for few years. and as for mods i'm training to be a fab/welder so would be able to do a lot myself but help never hurts...lol
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

wgtnnewbie wrote: i'm training to be a fab/welder so would be able to do a lot myself but help never hurts...lol


sounds like the makings of a great start to the 4x4ing world.. Image
ImageImage
User avatar
Ryan
Hard Yaka
Posts: 1187
Joined: Thu Aug 03, 2006 12:00 pm
Location: kapiti

Post by Ryan »

niblik wrote:ok.... 2 cent rambles .........

cruiser - cheapish for older models but heavy and can suffer from rust, strong as an ox and go forever.

surf - cheap and lightish, medium long wheelbase with 'family carryin' possibilities..

safari - coiled, bit more costly but comfy, heavy but strong too.

suzuki - cheap and light, go most anywhere..

ladas - cheap and very good 'bang for buck'..

heaps more info to find in previous threads..


search the net too.. you can find info to support any arguement.. so it really comes down to personnal peference..

happy shoppin!!!!!!! Image


go the suzuki sj413.....!!!!
or nissan terrano the one ive got was a good truck to start with!!
for on and offroad if your goin to sell your daily driver..........
Last edited by Ryan on Fri Jun 22, 2007 10:18 pm, edited 1 time in total.
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

wgtnnewbie wrote:funny cruisers seem to come up a lot....lol there's a 40 series just over the cul de sac from me with a V8 in it (can tell from the mighty roar as it leaves) plus one of the tutors at weltec has a pair, one chev powered ( his road legal rig) and the other ford powered which is his comp truck tho he hasn't competed for few years. and as for mods i'm training to be a fab/welder so would be able to do a lot myself but help never hurts...lol


sound like you need a 40. with all that help over the road you will never go wrong.
did ya tutor build the comp truk or buy it?? what colour is it??
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

A good option is to buy something cheap that you can learn in and not worry about killing, and then upgrade to something better later, Ride in a few different types (see if you can take them for a little spin).

Really depends on what you need..ie do you need it to double as a family car as well?, you may want to aim for a "shiny" tough vehicle and then look at building up a comp truck later (good practice for those welding skills).

Plently of cheap vitara's around, look at a 70 series cruiser (or a prado :lol: ), dare I mention Pajero..... :roll: these are common and seem cheap...., Safari's are good and you can pick up a cheap on from $5000 onwards. bear in mind like anything you are going to need to modify it to get better offroad. Look around for a cheap Lada....plenty around....Cloggy knows lots about them.

Think about if you want a Diesel or a Petrol....Sure A V8 is nice but can get expensive if you need it as a daily drive as well. Look at how easy it is to modify as well....look at what tyres you can put on it and what tyres you want later, consider things like difflocks and LSD's ....how easy are these to get and fit.

Will your new truck have airbags...if so then you are limited by bullbar choice...get something without them and then you can make your own.
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
turoa
Pyro Junior
Posts: 3112
Joined: Sun Oct 30, 2005 12:00 pm

Post by turoa »

Jerry wrote:A good option is to buy something cheap that you can learn in and not worry about killing, and then upgrade to something better later


See jerry agrees with me :wink:
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

See and I didn't even mention Towhooks :roll: :lol: :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
mercutio
Hard Yaka
Posts: 1955
Joined: Tue Jul 08, 2003 12:00 pm
Location: Wellytown

Post by mercutio »

my theory is buy something tha is built poperly to go off road from the start

unfortunately Mercedes G wagens don´t come on the market very often and they are usually $10,000+ for something that could be 20+ years old

not regretting my purchase at all though will be gitting my spring perches this week and hopefully have it on the road soon
my 4wd is not a truck

old mercedes never die but sometimes they do need some love

older cars are good,mercedes are better,older mercedes are the best
User avatar
fweddy
Hard Yaka
Posts: 1062
Joined: Fri Oct 13, 2006 12:00 pm
Location: North Canterbury

Post by fweddy »

If you know you are keen to do some serious stuff and want to start right into it, I say get something already as modded as possible (always cheaper than doing the mods yourself) - Something like a 40 or 70 series Cruiser or Prado, maybe Safari etc but you most likely won't really know what mods you will really want for your type of running.

If you are not so sure what type of truck you want or how much you are really going to do 4x4ing you are most likely best to go with a mid range type machine like surf, terrano, mu, suzuki etc then you have the option of modding that a bit later or selling and getting a better truck once you have some direction.

I started off with a $1000 surf that had never been offroad and learnt lots with that and had some fun and introduced it to knocked off mirrors, dented sills, bashed bash-plates and bent and removed bumpers. It had the potential (good body/low Ks) for lots of mods but I decided to sell it (got $1600) and bought myself a cruiser with nearly all the mods I found I wanted (so far).

You can get a good pre-modded truck for $5000-$7000, but if you shop round and push a bit you'll get cheaper.
User avatar
Scott
Hard Yaka
Posts: 156
Joined: Wed Mar 09, 2005 12:00 pm
Location: Rerewhakaaitu

Post by Scott »

What the hell is a merc g wagon :?
Post Reply

Return to “New Members and Beginners”