Page 1 of 1
winch help
Posted: Tue Aug 21, 2007 7:39 pm
by basics
ive got a 24V 9500 pound bull winch
and the solenoids have given up.
i see on 4wdbits theres one for $275 is that the way to go, or is there someone local (wellington) who knows what they are doing?
also, some one said repco have them for 100 bucks,any ideas?
any help would be good
Posted: Tue Aug 21, 2007 8:09 pm
by nz4x4
go for the 4wd bits ones. seem to last longer than the warn type solenoids in my experiance.
Posted: Wed Aug 22, 2007 8:45 am
by fisho
you can get a solid state unit from 4wd bits that replaces all four solenoids for about $280. or individual solenoids are available from fully equipped. last time i purchased these they were about 60 bucks each. the 4wd bits unit has proved to be very reliable,and handles constant winching better. cheers fisho.
Posted: Wed Aug 22, 2007 6:10 pm
by basics
fisho wrote:you can get a solid state unit from 4wd bits that replaces all four solenoids for about $280. or individual solenoids are available from fully equipped. last time i purchased these they were about 60 bucks each. the 4wd bits unit has proved to be very reliable,and handles constant winching better. cheers fisho.
thanks for your help guys,
( i really have no idea ) so if i buy this .....
http://www.4wdbits.co.nz/ProductDetails ... ductID=930
it will fit my winch? are there different ones for different winches?