Offroad-Express

Guys,

I have this little vibration problem when it's comes around 100 k/h.
So may need little bit lowering the front.

Is your front little lower than rear, when you measure on side-step?

My previous one (two actually) was about 10 to 15 mm lower on front so it will level when loading in back. However this one is flat.

Oh, thay are all SWB.

getting vibs at 100kph,,,,, sounds more likely to be wheel weights to me. get your local workshop to do a ballance on the wheels, might fix problem and be a whole lot cheaper than suspension work.
and you cant lower a 4x4,,, its against the law,, they can only be JACKED UP......

another thing is,, if you have been out in the mud recently,, it could just be mud which has settled to the bottom of the rim over night and dried, sticking to one side. throwing your ballance up the shitter,thats the first thing to check and the cheapest fix

Thanks woopas,

Well, I would say more like balancing the height for good handling.
I do not really want to make it lower.

I'll ask checking the balance.
It might be caused by rotation of tyres. I did them with spare every 5,000k. But this is the first time for this set of tyres.

Cheers