couple of parts i need

[basics]

any one here have a spare passanger side mirrow or a speedo cable for a bj70?

in welly would be great, need them to get a Wof.

thanks

[Beer_Cruiser]

I didnt think you need wing mirrors for wof only rear view mirror
I had no left for my last wof

[Sadam_Husain]

I think I might have a couple of old 40# speedo cables which should be the same as your one, I'll try and have a look for you tomorrow night.

If you replace your wing mirror only stick a genuine toyota one on coz those cheap taiwanese copys only last as long as your next trip into the scrub

[skid]

can you whack up a close pic of the mirror

I have a couple still up in taupo I think . but I found them to be different that other 70s

[basics]

I didnt think you need wing mirrors for wof only rear view mirror
I had no left for my last wof

maybe true, but i hate driving with out my mirrors. skid, ill post a pic soon

[Sadam_Husain]

I found the speedo cable I had but I think its buggared, the cable is siezed inside the sheathing and i can only see one end of the cable sticking out?

[basics]

I found the speedo cable I had but I think its buggared, the cable is siezed inside the sheathing and i can only see one end of the cable sticking out?

thanks for looking mate,still trying to upload the pic for skid

[basics]

[H2OLOVA]

Is the mirror mount itself broken or just the glass?? Easy to cut a new glass if need be, only difference is that it wont be curved like the original. Way cheaper than getting a whole mirror.

[skid]

whats wrong with that mirror

you can still see out of it

as predicted, the ones I got in taupo are different.

mine mount from the bottom

[oldblue]

Think you'll have a differant end [ speedo end] between the 40s and 70s, 40s screws on, 70s clicks in.

Is it just the circlip that has let go, if so then you can fit it all back togeather, I could show a pix of my speacial tool that I made to do just this.

[basics]

Think you'll have a differant end [ speedo end] between the 40s and 70s, 40s screws on, 70s clicks in.

Is it just the circlip that has let go, if so then you can fit it all back togeather, I could show a pix of my speacial tool that I made to do just this.

my speedo end screws in...

theres 3 little ball bearings that hold the mirror to the mount, and when it came out it threaded itself,so i need a new mount as well.

[Ryan]

looks pretty good too me?? these warrent guys are getting to hard!!!