Is my clutch stuffed..?

[turoa]

I think the flywheel bolts have some loose and then ovalled out the holes

Is the 2F flywheel still on Curlys old engine? I compared the 2F and 3F flywheels when I pulled my old engine out and the 2F is a thicker and heavier flywheel but should still fit.... and probably helps give a bit of torque to keep those 35's turning

I dont think it was still on the old motor. the old motor went to the tip awhile back anyway. But I do remember chucking a flywheel of unknown origin on the scrap metal trailer today. ill bring it over tommorow arvo if i remember.

[gazza]

dont lose any sleep i,d guess turoa,s right about the flywheel everything else can be checked once box is out. who knows the bolts may of just come loose and depending how long you have driven it might just locktite up if not plenty of 2nd hand flywheels about

[Sadam_Husain]

I had an old 2F flywheel sitting in the shed for 10 years and threw it out a couple of months ago

[Beer_Cruiser]

Turns out it was the flywheel bolts loose.Also the clutch is knacked so will be replacing all that.Thanks very much for your help Sadam and Tara13. Would have been lost without you. Also Gazza thanks for the lend of the jack.

[gazza]

Hi that was good news it being just the bolts, sry i could,nt hang about to help

[Dace]

Turns out it was the flywheel bolts loose.Also the clutch is knacked so will be replacing all that.Thanks very much for your help Sadam and Tara13. Would have been lost without you. Also Gazza thanks for the lend of the jack.

Hey Malcolm, ya want me ti get ya a good price for a genuine kit?

if so PM me ya chassis and model code

[Beer_Cruiser]

Turns out it was the flywheel bolts loose.Also the clutch is knacked so will be replacing all that.Thanks very much for your help Sadam and Tara13. Would have been lost without you. Also Gazza thanks for the lend of the jack.

Hey Malcolm, ya want me ti get ya a good price for a genuine kit?

if so PM me ya chassis and model code

Thanks mate but got one through MP Autosparts $470 for a heavy duty. But now I need to get hold of a Flywheel.Has anyone got one in the wellington area. I think any F series will fit
Cheers Malcolm

[Beer_Cruiser]

I finally got hold of a flywheel. Its of a 2f. Droped it off at MP autos this arvo to get machined so all going well Im putting my baby back together tomorrow night

[Sadam_Husain]

I finally got hold of a flywheel. Its of a 2f. Droped it off at MP autos this arvo to get machined so all going well Im putting my baby back together tomorrow night

What time are you starting tomorrow night?

I'm in Palmy tomorrow but should be able to help you put your baby back together when I get back?

[Beer_Cruiser]

I'll be opening the first beer at 4.01. Any time after that

[curly12]

Will try and get there

[Beer_Cruiser]

My baby is back in one peice!!! Thanks to a big crew of bloody good bastards Sadam and Tara 13 where there right from the start. Tonight had a huge turn out Tara 13 Sadam Abbo Taz 01 Curly Jason and Eugene all turn up to help drink beer talk bull shit and put my Cruiser back together. Thanks guys more beer to come

[Sadam_Husain]

It all turned out to be a successful mission in the end, replacement flywheel all bead blasted and re-ground, new flywheel bolts to replace those faulty ones that come loose, new pressure plate, clutch plate, release bearing and spiggot bearing.... shit its all looking pretty new in there now

You should get another 300,000km out of that Cruiser now Malcolm